Titanium safety valve, Titanium alloy safety valve, Titanium valve, Safety valve

Youdaoplaceholder0 Titanium safety valve is a safety valve made of titanium alloy material, which has excellent corrosion resistance and heat resistance ‌. Titanium alloy materials perform well in a variety of harsh working conditions, especially in highly corrosive environments. Titanium alloy valves hardly corrode in atmosphere, fresh water, seawater, hot steam, but very corrode in alkaline medium, and have excellent resistance to chloride ion corrosion ‌

Characteristics

Youdaoplaceholder0 Corrosion resistance ‌ : Titanium alloy can work stably in a variety of corrosive media due to its excellent corrosion resistance. For example, it has good corrosion resistance in aqua regia, sodium hypochlorite, chlorine water, wet chlorine gas and other media ‌

Youdaoplaceholder0 High-temperature resistance ‌ : Titanium alloy materials have high high-temperature resistance and can operate stably for a long time in high-temperature environments ‌

Youdaoplaceholder0 High strength ‌ : Titanium alloy has a relatively low density, but its specific strength (the ratio of strength to density) is the highest among metals. Therefore, titanium alloy safety valves have high mechanical strength and pressure-bearing capacity ‌

Youdaoplaceholder0 Lightweight and compact ‌ : Titanium alloy safety valves are lightweight and compact in structure, with no restrictions on installation location, suitable for various scenarios ‌

Working principle

Titanium safety valves mainly utilize the force of the compressed spring to balance the force acting on the valve disc. The compression amount of the helical ring spring can be adjusted by turning the adjusting nut, thereby correcting the opening (setting) pressure of the safety valve as needed. When the system pressure exceeds the set value, the spring is compressed and the valve disc opens to release the excess pressure. When the system pressure drops below SET value, the spring returns to its original state and the valve disc closes ‌

Application scenarios

Titanium safety valves are widely used in the chlor-alkali industry, soda ash industry, pharmaceutical industry, fertilizer industry, fine chemical industry, textile fiber synthesis and dyeing industry, as well as the production of basic organic acids and inorganic salts and other fields. In these areas, the medium often has strong corrosiveness or high temperature and high pressure, etc. Therefore, high performance materials such as titanium alloy are needed to make safety valves ‌

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.