Alloy WE132,Inconel we132 Pipe,,E FORU

British Specs:，American Specs:MIL-E-6844 ClB，German Specs:

**Product Introduction: Alloy WE132 / INCONEL® WE132 Pipe** **Overview** Alloy WE132 Pipe (INCONEL® WE132) is a nickel-chromium-cobalt-molybdenum alloy supplied in tubular form, specifically engineered for high-temperature applications requiring exceptional oxidation resistance, corrosion resistance, and mechanical strength. This product form maintains the alloy's superior performance characteristics while providing reliable service in extreme environments involving high temperatures and aggressive media. --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 20.0 - 24.0 | | Cobalt (Co) | 10.0 - 13.0 | | Molybdenum (Mo) | 8.0 - 10.0 | | Titanium (Ti) | ≤ 0.5 | | Aluminum (Al) | ≤ 0.5 | | Iron (Fe) | ≤ 1.5 | | Carbon (C) | ≤ 0.05 | | Manganese (Mn) | ≤ 0.5 | | Silicon (Si) | ≤ 0.5 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.35 g/cm³ (0.302 lb/in³) | | Melting Range | 1330-1380°C (2426-2516°F) | | Electrical Resistivity | 1.25 μΩ·m | | Thermal Conductivity | 11.2 W/m·K (at 100°C) | | Specific Heat Capacity | 420 J/kg·K (at 20°C) | | Coefficient of Thermal Expansion | 13.8 × 10⁻⁶/°C (20-300°C) | | Modulus of Elasticity | 215 GPa (31.2 × 10⁶ psi) | --- **Mechanical Properties (Solution Annealed Condition)** | Temperature | Tensile Strength | Yield Strength (0.2%) | Elongation | |--------------------|------------------|----------------------|------------| | Room Temperature | 800-900 MPa | 500-600 MPa | 30-40% | | 815°C (1500°F) | 500-600 MPa | 400-500 MPa | 25-35% | | 980°C (1800°F) | 300-400 MPa | 250-350 MPa | 20-30% | --- **Product Applications** **Aerospace Systems** - Aircraft engine exhaust components - Gas turbine bleed air systems - Afterburner fuel lines - High-temperature hydraulic lines - Thermal management system piping **Power Generation** - Gas turbine fuel piping - Heat recovery steam generator tubes - High-temperature steam lines - Nuclear reactor coolant pipes - Turbine bypass systems **Chemical Processing** - High-temperature reactor tubes - Heat exchanger tubing - Corrosive chemical transfer lines - Furnace radiant tubes - Process gas handling systems **Oil and Gas Industry** - Downhole instrumentation tubing - Wellhead control lines - High-pressure high-temperature flow lines - Refinery process piping - Thermal recovery systems --- **International Standards & Specifications** **ASTM Standards** - ASTM B167: Standard Specification for Seamless Nickel-Chromium-Iron Alloy Pipe & Tube - ASTM B163: Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes - ASTM B829: Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes **ASME Standards** - ASME SB-167: Seamless Nickel-Chromium-Iron Alloy Pipe & Tube - ASME SB-163: Seamless Nickel and Nickel-Alloy Condenser and Heat-Exchanger Tubes - ASME B36.19: Stainless Steel Pipe **International Standards** - ISO 6207: Nickel and nickel alloys — Seamless pipe and tube - ISO 1127: Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length **European Standards** - EN 10305: Steel tubes for precision applications - DIN 17456: Seamless circular stainless steel tubes --- **Pipe Specifications & Dimensions** **Available Types** - Seamless pipes - Welded and cold-worked pipes - Heat exchanger tubes - Condenser tubes - Instrumentation tubes **Size Range** - Outer Diameter: 6mm to 500mm - Wall Thickness: 1.0mm to 50mm - Length: Up to 12 meters (standard) - Schedule: 5S to XXS **Tolerances** - Outer Diameter: ±1% or ±0.1mm (whichever is greater) - Wall Thickness: ±10% - Length: ±3mm (cut length) - Straightness: ≤1mm per meter --- **Fabrication & Installation** **Welding Procedures** - TIG welding recommended - Matching filler metals (ERNiCrCoMo-1) - Shielding gas: 100% Argon - Preheating: Generally not required - Post-weld heat treatment: Optional **Bending and Forming** - Cold bending radius: Minimum 3x OD - Hot bending temperature: 1150-1200°C - Annealing after severe deformation - Special considerations for thin-walled pipes **Quality Control** - Hydrostatic testing per applicable standards - Non-destructive testing (UT, RT, PT) - Dimensional verification - Surface inspection --- **Performance Data** **Maximum Service Temperatures** - Continuous service in air: 1150°C (2102°F) - Intermittent service: 1200°C (2192°F) - Reducing atmospheres: 1100°C (2012°F) - Sulfur-containing atmospheres: 900°C (1652°F) **Corrosion Resistance** - Excellent resistance to oxidizing environments - Good resistance to reducing atmospheres - Superior performance in thermal cycling conditions - Resistant to stress corrosion cracking --- **Note** INCONEL® WE132 Pipe offers exceptional performance in high-temperature applications where both structural integrity and corrosion resistance are critical. The pipe form is particularly suitable for fluid handling systems operating under extreme temperature and pressure conditions, providing reliable long-term service in demanding environments. **Disclaimer** The information provided is for reference purposes. Actual properties may vary based on manufacturing process, heat treatment, and pipe dimensions. For critical applications, consult manufacturer's technical data sheets and applicable standards. All materials should be used in compliance with relevant codes and engineering standards.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3070 gallon liquid totes Special package is available on request.