Alloy WE132,Inconel we132 Bar(Round bar, Flat bar),,E FORU

British Specs:，American Specs:MIL-E-6844 ClB，German Specs:

**Product Introduction: Alloy WE132 / INCONEL® WE132 Bar (Round Bar & Flat Bar)** **Overview** Alloy WE132 Bar (INCONEL® WE132) is a nickel-chromium-cobalt-molybdenum alloy supplied in both round and flat bar forms, designed for high-temperature applications requiring exceptional oxidation resistance, corrosion resistance, and mechanical strength. This wrought product form combines the alloy's superior high-temperature performance with excellent machinability and structural integrity, making it ideal for critical components in extreme service environments. --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 20.0 - 24.0 | | Cobalt (Co) | 10.0 - 13.0 | | Molybdenum (Mo) | 8.0 - 10.0 | | Titanium (Ti) | ≤ 0.5 | | Aluminum (Al) | ≤ 0.5 | | Iron (Fe) | ≤ 1.5 | | Carbon (C) | ≤ 0.05 | | Manganese (Mn) | ≤ 0.5 | | Silicon (Si) | ≤ 0.5 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.35 g/cm³ (0.302 lb/in³) | | Melting Range | 1330-1380°C (2426-2516°F) | | Electrical Resistivity | 1.25 μΩ·m | | Thermal Conductivity | 11.2 W/m·K (at 100°C) | | Specific Heat Capacity | 420 J/kg·K (at 20°C) | | Coefficient of Thermal Expansion | 13.8 × 10⁻⁶/°C (20-300°C) | | Modulus of Elasticity | 215 GPa (31.2 × 10⁶ psi) | --- **Mechanical Properties (Solution Annealed Condition)** | Temperature | Tensile Strength | Yield Strength (0.2%) | Elongation | |--------------------|------------------|----------------------|------------| | Room Temperature | 800-900 MPa | 500-600 MPa | 30-40% | | 815°C (1500°F) | 500-600 MPa | 400-500 MPa | 25-35% | | 980°C (1800°F) | 300-400 MPa | 250-350 MPa | 20-30% | --- **Product Applications** **Aerospace Components** - Gas turbine engine shafts and rotating components - Turbine disks and blades - Combustion chamber structural parts - Afterburner components - High-temperature fasteners and mounting systems **Power Generation Equipment** - Gas turbine rotor components - High-temperature bolting materials - Valve stems and actuator components - Heat exchanger structural parts - Nuclear reactor core components **Chemical Processing Industry** - Reactor agitator shafts - Heat exchanger support structures - High-temperature valve bodies - Pump shafts and impellers - Furnace radiant tubes and supports **Industrial Applications** - Heat treatment fixture components - Industrial furnace rolls and conveyors - Thermal processing equipment frames - High-temperature tooling and fixtures --- **International Standards & Specifications** **ASTM Standards** - ASTM B166: Standard Specification for Nickel-Chromium-Iron Alloys Rod, Bar, and Wire **Aerospace Standards** - AMS 5667: Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings **International Standards** - ISO 9724: Nickel and Nickel Alloys — Bars **European Standards** - EN 10095: Heat Resisting Steels and Nickel Alloys **Quality Standards** - EN 10204 3.1/3.2 Material Certification - ISO 9001 Quality Management Systems --- **Bar Specifications & Dimensions** **Round Bars** - Diameter Range: 5mm to 300mm - Standard Length: 3000mm to 6000mm - Diameter Tolerance: h9 (ground), h11 (turned) - Straightness: ≤1mm per meter **Flat Bars** - Thickness: 5mm to 100mm - Width: 20mm to 300mm - Length: 2000mm to 4000mm - Thickness Tolerance: ±0.1mm to ±0.5mm - Width Tolerance: ±1.0mm **Available Conditions** - Hot rolled and annealed - Cold drawn and annealed - Centerless ground - Turned and polished - Solution annealed condition --- **Fabrication & Processing** **Machining Parameters** - Cutting Speed: 15-25 m/min (turning) - Feed Rate: 0.1-0.3 mm/rev - Depth of Cut: 1-4 mm (roughing), 0.1-0.5 mm (finishing) - Tool Material: Carbide tools with positive rake angles - Cooling: Recommended for heavy machining operations **Heat Treatment** - Solution Annealing: 1150-1180°C (2102-2156°F) - Rapid Cooling: Water quench or fast air cool - Stress Relief: 870-900°C (1600-1650°F) - Atmosphere: Controlled or protective atmosphere recommended **Welding & Joining** - TIG welding recommended for best results - Matching filler metals - Preheating: Generally not required - Post-weld heat treatment: Optional, depending on application --- **Quality Assurance** **Testing Requirements** - Chemical analysis verification - Mechanical properties testing - Ultrasonic testing for internal quality - Macroetch examination for grain structure - Surface quality inspection **Certification** - Mill test certificate to EN 10204 3.1/3.2 - Material test reports - Heat treatment compliance certification - Full material traceability from melt to final product --- **Note** INCONEL® WE132 Bars offer exceptional high-temperature strength, oxidation resistance, and structural stability, making them suitable for the most demanding applications in aerospace, power generation, and chemical processing industries. The availability in both round and flat bar forms provides design flexibility for various structural and component applications. **Disclaimer** The information provided is for reference purposes. Actual properties may vary based on manufacturing process, heat treatment, and specific bar dimensions. For critical applications, consult manufacturer's technical data sheets and applicable standards. All materials should be used in compliance with relevant codes, safety regulations, and engineering standards.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3069 gallon liquid totes Special package is available on request.