Alloy 713C,Inconel 713C Foil,Shim,,E FORU

British Specs:，American Specs:，German Specs:

### **Technical Note: Alloy 713C / INCONEL® 713C Foil & Shim Products** #### **Important Processing Notice** *Note: INCONEL 713C is primarily a casting alloy with limited workability due to its high aluminum and titanium content (typically 6.0-7.5% combined). Production of thin foil and shim products is exceptionally challenging and may not be commercially feasible for standard applications. The following information represents theoretical capabilities rather than standard production offerings.* --- ### **Alternative Recommended Materials** For foil and shim applications requiring similar high-temperature performance, consider these workable alternatives: - **INCONEL 718** (UNS N07718) - Excellent workability to thin gauges - **HAYNES 214** - Superior oxidation resistance with good formability - **INCONEL 625** - Good general corrosion resistance and fabricability --- ### **Theoretical Product Introduction: Alloy 713C Foil & Shim** #### **Overview** INCONEL® 713C foil and shim would represent specialized thin-gauge products for extreme high-temperature applications, though commercial production is limited due to the alloy's inherent casting characteristics and poor workability. --- ### **Chemical Composition (Theoretical % Weight)** | Element | Content (%) | Processing Challenge | |---------|-------------|---------------------| | **Nickel (Ni)** | Balance | - | | **Chromium (Cr)** | 12.0-14.0 | - | | **Molybdenum (Mo)** | 3.8-5.2 | - | | **Niobium (Nb)** | 1.8-2.5 | Limits cold workability | | **Aluminum (Al)** | 5.5-6.5 | Promotes oxide scale, limits rolling | | **Titanium (Ti)** | 0.5-1.0 | Combined with Al reduces ductility | | **Zirconium (Zr)** | 0.05-0.15 | - | | **Boron (B)** | 0.005-0.015 | Affects grain boundary properties | | **Carbon (C)** | 0.08-0.20 | Reduces formability | --- ### **Theoretical Physical Properties** | Property | Value | Note | |---------|-------|------| | **Density** | 7.91 g/cm³ | Standard | | **Melting Range** | 1260-1340°C | - | | **Thermal Conductivity** | 13.4 W/m·K at 20°C | - | | **Thermal Expansion** | 14.2 μm/m·K at 20-100°C | - | | **Theoretical Minimum Thickness** | >0.1mm | Limited by workability | --- ### **Potential Applications (If Available)** #### **Specialized Aerospace** - Experimental turbine seal shims - High-temperature sensor mounting foils - Thermal barrier system components #### **Research & Development** - High-temperature test specimens - Advanced material research - Prototype development --- ### **International Standards** *No specific standards exist for 713C foil/shim products due to manufacturing constraints* --- ### **Recommended Alternative Specifications** For actual foil and shim requirements, consider these established specifications: **INCONEL 718 Foil/Shim:** - **ASTM B**: B670 (Plate, Sheet, and Strip) - **AMS**: 5596, 5597 - **Thickness Range**: 0.025mm to 2.0mm **HAYNES 214 Foil/Shim:** - **ASTM B**: B435, B572 - **Excellent oxidation resistance to 1200°C** --- ### **Contact Recommendation** For genuine foil and shim applications, we recommend discussing your specific requirements with our technical team to identify the most suitable alternative material that can meet your performance needs while maintaining practical manufacturability. **Our technical team can provide detailed specifications for workable high-temperature alloys that can achieve similar performance in thin-gauge configurations.** --- *Disclaimer: INCONEL® is a registered trademark of Special Metals Corporation. The information provided is for technical reference only. Manufacturing feasibility should be verified for specific applications.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3000 gallon liquid totes Special package is available on request.