,FM-82 Foil,Shim,UNS N06082,E FORU

British Specs:，American Specs:AMS 5836 Welding Wire，German Specs:

**Product Introduction: FM-82 Foil & Shim / UNS N06082** **Overview** FM-82 Foil and Shim are ultra-thin product forms of nickel-chromium-molybdenum-niobium alloy UNS N06082, precision-engineered for applications requiring exceptional dimensional stability, superior surface quality, and excellent corrosion resistance. These product forms maintain the alloy's characteristic properties while offering precise thickness control and excellent fabricability for specialized applications in demanding environments. **Key Characteristics** - Precision thickness control with tight tolerances (±0.0025mm) - Superior surface finish and flatness - Excellent corrosion resistance in various environments - Good high-temperature stability up to 1100°C - Excellent formability and spring properties - Consistent mechanical properties throughout length - Good weldability and joinability --- **Chemical Composition (Weight %)** | Element | Content (%) | Tolerance | |------------------|-----------------|----------------| | Nickel (Ni) | Balance | ±1.5% | | Chromium (Cr) | 18.0 - 22.0 | ±0.5% | | Iron (Fe) | ≤ 3.0 | - | | Molybdenum (Mo) | 2.0 - 4.0 | ±0.3% | | Niobium (Nb) | 1.5 - 4.0 | ±0.2% | | Titanium (Ti) | ≤ 1.0 | - | | Manganese (Mn) | ≤ 1.0 | - | | Silicon (Si) | ≤ 0.75 | - | | Carbon (C) | ≤ 0.10 | - | | Phosphorus (P) | ≤ 0.03 | - | | Sulfur (S) | ≤ 0.015 | - | --- **Physical Properties** | Property | Value | Test Standard | |-------------------------------|---------------------------|-------------------| | Density | 8.28 g/cm³ (0.299 lb/in³) | ASTM E54 | | Melting Range | 1350-1400°C (2460-2550°F) | - | | Thermal Conductivity | 10.1 W/m·K (at 100°C) | ASTM E1461 | | Specific Heat Capacity | 430 J/kg·K (at 20°C) | ASTM E1269 | | Electrical Resistivity | 1.18 μΩ·m | ASTM B193 | | Coefficient of Thermal Expansion | 13.5 × 10⁻⁶/°C (20-300°C) | ASTM E228 | | Modulus of Elasticity | 205 GPa (29.7 × 10⁶ psi) | ASTM E111 | --- **Mechanical Properties (Annealed Condition)** | Thickness Range | Tensile Strength | Yield Strength (0.2% Offset) | Elongation | Hardness (HV) | |--------------------|------------------|-----------------------------|------------|---------------| | Foil (0.025-0.1mm) | 710-790 MPa | 330-410 MPa | 30-40% | 185-225 | | Shim (0.1-0.5mm) | 690-760 MPa | 310-380 MPa | 35-45% | 175-215 | | Shim (0.5-1.0mm) | 680-750 MPa | 300-370 MPa | 40-50% | 170-210 | --- **Product Applications** **Electronics & Electrical Components** - Lead frames and connectors - Spring contacts and terminals - Battery components and current collectors - RF shielding and EMI gaskets - Semiconductor packaging components **Aerospace & Defense Applications** - Precision shims for engine assemblies - Thermal protection foils - Sensor diaphragms and elements - Instrumentation components - Sealing and gasket materials **Chemical Processing Industry** - Corrosion-resistant gaskets - Filter elements and screens - Sensor protection foils - Laboratory equipment components - Sealing shims for flanged connections **Medical Devices** - Surgical instrument components - Implantable device parts - Medical spring elements - Diagnostic equipment components - Precision spacers and shims **Automotive Applications** - Fuel cell components - Sensor shims and spacers - Electrical connector components - Emission control system parts - Precision washers and seals --- **International Standards & Specifications** **ASTM Standards** - ASTM B906: Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip **Aerospace Materials Specifications** - AMS 5599: Nickel Alloy, Corrosion and Heat-Resistant, Strip **International Standards** - ISO 6208: Nickel and nickel alloys — Plate, sheet and strip - DIN 17750: Nickel and nickel alloys - Plate, sheet and strip **Quality Standards** - EN 10204 3.1/3.2 Material Certification - ISO 9001 Quality Management Systems - Customer-specific requirements and specifications --- **Product Specifications & Dimensions** **Foil Specifications** - Thickness: 0.025mm to 0.1mm (0.001" to 0.004") - Width: Up to 300mm (12 inches) - Surface Finish: Bright annealed or cold rolled - Thickness Tolerance: ±0.0025mm (±0.0001") - Standard Conditions: Solution annealed **Shim Specifications** - Thickness: 0.1mm to 1.0mm (0.004" to 0.040") - Width: Up to 600mm (24 inches) - Surface Finish: Bright finished, matte, or special coated - Thickness Tolerance: ±0.005mm to ±0.025mm - Available Tempers: Solution annealed, 1/4 hard, 1/2 hard, full hard **Available Forms** - Coils and spools - Cut-to-length strips - Blanked components - Custom-shaped parts --- **Fabrication & Processing Characteristics** **Forming Operations** - Excellent deep drawing capability - Precision stamping and blanking - Photo-etching compatibility - Bending and forming operations - Spring temper available for formed parts **Heat Treatment** - Solution Annealing: 1150-1200°C (2100-2190°F) - Protective atmosphere recommended - Stress relief annealing available - Custom heat treatments upon request **Joining Methods** - Resistance welding suitable - TIG and laser welding applicable - Brazing with nickel-based filler metals - Adhesive bonding possible - Mechanical fastening methods --- **Quality Assurance & Testing** **Standard Testing Protocol** - Chemical analysis certification - Mechanical properties testing - Surface quality inspection - Dimensional verification - Flatness measurement - Edge condition examination **Special Testing Available** - Corrosion testing per ASTM G28 - Microstructural examination - Surface roughness measurement - Formability testing - Springback characteristics **Certification Requirements** - Mill test certificate to EN 10204 3.1/3.2 - Full material traceability - Heat treatment certification - Compliance with specified standards --- **Note** FM-82 Foil and Shim offer exceptional precision and consistency for manufacturing critical components requiring high corrosion resistance and reliable performance. The material's combination of excellent fabricability and maintained corrosion resistance in thin sections makes it particularly valuable for precision applications in demanding environments. **Disclaimer** The information provided is for reference purposes. Actual properties may vary based on manufacturing process and heat treatment. For critical applications, consult manufacturer's technical data sheets and applicable standards. Performance characteristics should be verified through appropriate testing for specific applications.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3052 gallon liquid totes Special package is available on request.