,FM-82 Plate,UNS N06082,E FORU

British Specs:，American Specs:AMS 5836 Welding Wire，German Specs:

**Product Introduction: FM-82 Plate / UNS N06082** **Overview** FM-82 Plate is a nickel-chromium-molybdenum-niobium alloy plate product classified under UNS N06082, designed for applications requiring exceptional corrosion resistance and high-temperature performance in plate form. This wrought product offers excellent mechanical properties and outstanding resistance to various corrosive environments, making it suitable for pressure vessels, chemical processing equipment, and other critical industrial applications where reliability and durability are essential. **Key Characteristics** - Excellent corrosion resistance in oxidizing and reducing environments - Superior resistance to pitting, crevice corrosion, and stress corrosion cracking - Good high-temperature strength and oxidation resistance up to 1100°C - Excellent mechanical properties maintained at elevated temperatures - Good weldability and fabricability - Resistance to intergranular corrosion --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 18.0 - 22.0 | | Iron (Fe) | ≤ 3.0 | | Molybdenum (Mo) | 2.0 - 4.0 | | Niobium (Nb) | 1.5 - 4.0 | | Titanium (Ti) | ≤ 1.0 | | Manganese (Mn) | ≤ 1.0 | | Silicon (Si) | ≤ 0.75 | | Carbon (C) | ≤ 0.10 | | Phosphorus (P) | ≤ 0.03 | | Sulfur (S) | ≤ 0.015 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.28 g/cm³ (0.299 lb/in³) | | Melting Range | 1350-1400°C (2460-2550°F) | | Thermal Conductivity | 10.1 W/m·K (at 100°C) | | Specific Heat Capacity | 430 J/kg·K (at 20°C) | | Electrical Resistivity | 1.18 μΩ·m | | Coefficient of Thermal Expansion | 13.5 × 10⁻⁶/°C (20-300°C) | | Modulus of Elasticity | 205 GPa (29.7 × 10⁶ psi) | --- **Mechanical Properties (Annealed Condition)** | Property | Room Temperature | 650°C (1200°F) | |---------------------------|-------------------------|----------------------| | Tensile Strength | 690-760 MPa (100-110 ksi) | 480-550 MPa (70-80 ksi) | | Yield Strength (0.2% Offset) | 310-380 MPa (45-55 ksi) | 260-310 MPa (38-45 ksi) | | Elongation | 40-50% | 30-40% | | Hardness (Brinell) | 170-210 HB | - | --- **Product Applications** **Chemical Processing Industry** - Pressure vessel construction - Reactor vessels and tanks - Heat exchanger plates and baffles - Column internals and trays - Mixing vessel components **Power Generation** - Boiler components - Heat recovery system plates - Flue gas ducting plates - Structural supports in high-temperature areas **Oil and Gas Industry** - Pressure vessel plates - Heat exchanger plates - Process equipment fabrication - Offshore platform components **Pollution Control** - Scrubber vessel plates - Ductwork components - Chimney liners - Waste treatment equipment **Other Applications** - Pharmaceutical processing equipment - Food processing machinery - Pulp and paper industry equipment - Aerospace components --- **International Standards & Specifications** **ASTM Standards** - ASTM B168: Standard Specification for Nickel-Chromium-Iron Alloy Plate, Sheet, and Strip - ASTM B906: Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip **ASME Standards** - ASME SB-168: Nickel-Chromium-Iron Alloy Plate, Sheet, and Strip - ASME Section II: Material Specifications **ISO Standards** - ISO 6208: Nickel and nickel alloys — Plate, sheet and strip **European Standards** - EN 10095: Heat resisting steels and nickel alloys - DIN 17750: Nickel and nickel alloys - Plate, sheet and strip --- **Plate Specifications & Dimensions** **Available Forms** - Hot-rolled plates - Cold-rolled plates - Annealed and pickled plates - Solution annealed plates **Size Range** - Thickness: 5mm to 100mm - Width: 1000mm to 2000mm - Length: 2000mm to 6000mm - Custom sizes available **Tolerances** - Thickness: ±5% or ±0.1mm (whichever is greater) - Width: ±10mm - Length: ±15mm - Flatness: According to standard requirements --- **Fabrication & Processing** **Welding Procedures** - TIG and MIG welding suitable - Recommended filler metal: ERNiCrFe-7 - Shielding gas: 100% Argon - Preheating: Generally not required - Interpass temperature: Max 150°C **Machining Parameters** - Cutting speed: 15-25 m/min - Feed rate: 0.1-0.3 mm/rev - Use positive rake tools - Recommended: Carbide tools with adequate cooling **Forming Operations** - Cold forming possible in annealed condition - Hot working temperature: 1150-1200°C - Minimum bend radius: 3x plate thickness --- **Quality Assurance** **Standard Testing** - Chemical analysis certification - Mechanical testing certification - Ultrasonic testing (as required) - Intergranular corrosion testing per ASTM G28 - Hardness testing **Certification** - Mill test certificate to EN 10204 3.1/3.2 - Full traceability maintained - Compliance with specified standards --- **Note** FM-82 Plate offers superior performance in aggressive chemical environments and high-temperature applications. The material's excellent combination of corrosion resistance and mechanical properties makes it suitable for the most demanding industrial applications. Proper fabrication techniques and quality control measures ensure optimal performance in service. **Disclaimer** The information provided is for reference purposes. Actual properties may vary based on manufacturing process and heat treatment. For critical applications, consult manufacturer's technical data sheets and applicable standards. All materials should be used in compliance with relevant codes and engineering standards.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3046 gallon liquid totes Special package is available on request.