5154-H36 Aluminum alloy,Aluminum 5154-H36 alloy,E FORU

### **5154-H36 Aluminum Alloy Product Datasheet** **Material Overview** 5154-H36 is a medium-to-high strength strain-hardened temper of the 5154 aluminum-magnesium alloy. The H36 temper provides approximately half-hard strength characteristics through controlled strain hardening and stabilization. This temper offers an optimal balance between strength, corrosion resistance, and moderate formability, making it suitable for structural applications requiring higher mechanical performance. --- ### **1. Chemical Composition (Weight %)** | Element | Composition Range | |---------|-------------------| | Aluminum (Al) | Balance | | Magnesium (Mg) | 3.1 - 3.9 | | Manganese (Mn) | ≤ 0.50 | | Chromium (Cr) | 0.15 - 0.35 | | Iron (Fe) | ≤ 0.50 | | Silicon (Si) | ≤ 0.50 | | Copper (Cu) | ≤ 0.10 | | Zinc (Zn) | ≤ 0.20 | | Titanium (Ti) | ≤ 0.20 | | Other Elements (Each) | ≤ 0.05 | | Other Elements (Total) | ≤ 0.15 | --- ### **2. Physical Properties** | Property | Value | |----------|-------| | Density | 2.66 g/cm³ | | Melting Range | 590 - 650 °C | | Electrical Conductivity | 31-35% IACS | | Thermal Conductivity | 122 - 132 W/m·K | | Coefficient of Thermal Expansion (20-100°C) | 23.8 × 10⁻⁶/°C | | Modulus of Elasticity | 70 GPa | | Specific Heat Capacity | 900 J/kg·K | --- ### **3. Mechanical Properties** | Property | Typical Value | Standard Minimum | |----------|---------------|------------------| | Tensile Strength | 330 - 380 MPa | 310 MPa | | Yield Strength (0.2% Offset) | 250 - 290 MPa | 240 MPa | | Elongation (50mm) | 6 - 10% | 5% | | Hardness (Brinell) | 85 - 95 HB | - | | Shear Strength | 200 - 240 MPa | - | | Fatigue Strength | 140 - 160 MPa | - | --- ### **4. Technical Applications** **Primary Application Sectors:** - Marine & Offshore: Structural hull components, reinforcement frames, deck support members - Transportation: Truck body reinforcements, trailer structural members, heavy-duty vehicle components - Industrial: Pressure vessel shells, structural platforms, support frames - Architecture: Load-bearing marine structures, bridge components, heavy-duty architectural elements **Specific Applications:** - Ship building structural members - Heavy-duty marine equipment - Transportation structural components - Industrial platform flooring - Pressure vessel construction --- ### **5. International Standards Compliance** | Standard Organization | Designation | |----------------------|-------------| | ASTM International | ASTM B209-5154 H36 | | European Standards | EN AW-5154A H36 (EN 485-2) | | International Standards | ISO 6361-2 AlMg3.5 H36 | | Japanese Standards | JIS A5154 H36 | | Chinese Standards | GB/T 3880.2 5A54 H36 | --- ### **6. Material Characteristics** **Key Advantages:** - Enhanced strength characteristics over H32 and H34 tempers - Maintains excellent corrosion resistance, particularly in marine environments - Good structural stability and fatigue performance - Suitable for welded construction with proper procedures - Maintains adequate formability for structural applications **Processing Considerations:** - Weldability: Good using GTAW/GMAW with 5356/5183 filler - Formability: Moderate - requires attention to bend radii - Machinability: Good with proper tool geometry - Not suitable for further heat treatment --- ### **7. Quality Assurance** **Standard Testing:** - Mechanical property verification - Chemical composition analysis - Corrosion resistance testing - Dimensional inspection - Surface quality assessment **Certification:** - Mill test certificates per EN 10204 3.1/3.2 - Compliance with international standards - Traceability maintained --- **Note:** This datasheet provides typical values and characteristics. For specific application requirements and detailed technical specifications, please consult with our technical support team. Properties may vary based on product form and manufacturing processes.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1850 gallon liquid totes Special package is available on request.