1060-H16 Aluminum alloy,Aluminum 1060-H16 alloy,E FORU

### **1060-H16 Aluminum Alloy Product Introduction** **1. Overview** 1060-H16 is a strain-hardened temper of commercially pure 1060 aluminum alloy, representing a three-quarter hard condition. As part of the 1xxx series of non-heat-treatable aluminum alloys, the "H16" temper designation indicates the material has been strain-hardened to achieve a strength level approximately three-quarters of the way between the O (annealed) temper and H18 (full-hard) temper. This temper offers higher strength while maintaining limited formability, making it suitable for applications requiring greater rigidity and dimensional stability. **2. Chemical Composition (Typical, % by Weight)** The chemical composition maintains the high purity standards of 1060 aluminum alloy. | Element | Content (%) | |---------|-------------| | **Aluminum (Al)** | ≥99.60 | | **Iron (Fe)** | ≤0.35 | | **Silicon (Si)** | ≤0.25 | | **Copper (Cu)** | ≤0.05 | | **Manganese (Mn)** | ≤0.03 | | **Zinc (Zn)** | ≤0.05 | | **Other Elements (Each)** | ≤0.03 | | **Other Elements (Total)** | ≤0.10 | *Note: The high purity composition (99.6% min aluminum) ensures excellent corrosion resistance and electrical conductivity despite the higher strain-hardened condition.* **3. Physical Properties** | Property | Value | |----------|-------| | **Density** | 2.71 g/cm³ | | **Melting Point** | 645-655°C | | **Electrical Conductivity** | 62% IACS | | **Thermal Conductivity** | 234 W/(m·K) | | **Coefficient of Thermal Expansion** | 23.4 × 10⁻⁶/K (20-100°C) | | **Modulus of Elasticity** | 69 GPa | **4. Mechanical Properties (Typical for H16 Temper)** The H16 temper provides a three-quarter hard condition with enhanced strength properties. | Property | Value | |----------|-------| | **Tensile Strength** | 125-155 MPa | | **Yield Strength (0.2% Offset)** | 110-135 MPa | | **Elongation (% in 50mm)** | 5-10% | | **Hardness (Brinell)** | 36-42 HB | *Key Characteristics of H16 Temper:* * **Enhanced Strength**: Higher mechanical strength compared to H14 temper * **Good Rigidity**: Excellent dimensional stability and resistance to deformation * **Limited Formability**: Suitable for simple bending operations only * **Maintained Conductivity**: Preserves good electrical and thermal conductivity **5. Product Applications** 1060-H16 is primarily supplied as sheet and strip for applications requiring higher strength and rigidity. * **Architectural Applications**: Structural panels, roofing sheets requiring high stiffness * **Electronic Enclosures**: Housing and chassis requiring dimensional stability * **Industrial Components**: Machine parts, brackets, and support elements * **Signage Industry**: Rigid sign boards and identification plates * **Electrical Industry**: Sturdy busbars and conductive components * **Transportation**: Interior panels and structural components * **Heat Exchangers**: Rigid fins and heat transfer components **6. International Standards** 1060-H16 is recognized globally under various standardization systems. | Standard System | Designation | |-----------------|-------------| | **ISO** | Al99.6 H16 | | **EN (Europe)** | EN AW-1060 H16 | | **ASTM (USA)** | ASTM B209 1060 H16 | | **UNS (USA)** | UNS A91060 H16 | | **JIS (Japan)** | A1060 H16 | | **GB (China)** | 1060 H16 | --- **Summary** **1060-H16 Aluminum Alloy** represents a **three-quarter hard temper** that provides **enhanced strength and rigidity** while maintaining the fundamental benefits of high-purity aluminum. This temper offers significantly higher mechanical properties compared to the H14 condition, making it ideal for applications where dimensional stability and resistance to deformation are critical. While its formability is limited to simple bending operations, the H16 temper maintains excellent electrical and thermal conductivity, along with superior corrosion resistance inherent to the 1060 alloy series. The combination of these properties makes 1060-H16 particularly valuable for architectural applications, electronic enclosures, industrial components, and other applications where both structural integrity and the classic advantages of pure aluminum are required.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1432 gallon liquid totes Special package is available on request.