1060-H14 Aluminum alloy,Aluminum 1060-H14 alloy,E FORU

### **1060-H14 Aluminum Alloy Product Introduction** **1. Overview** 1060-H14 is a strain-hardened temper of commercially pure 1060 aluminum alloy, representing a half-hard condition. As part of the 1xxx series of non-heat-treatable aluminum alloys, the "H14" temper designation indicates the material has been strain-hardened to achieve a strength level approximately halfway between the O (annealed) temper and H18 (full-hard) temper. This temper offers an excellent combination of moderate strength and adequate formability, making it one of the most versatile and widely used tempers for general-purpose applications. **2. Chemical Composition (Typical, % by Weight)** The chemical composition maintains the high purity standards of 1060 aluminum alloy. | Element | Content (%) | |---------|-------------| | **Aluminum (Al)** | ≥99.60 | | **Iron (Fe)** | ≤0.35 | | **Silicon (Si)** | ≤0.25 | | **Copper (Cu)** | ≤0.05 | | **Manganese (Mn)** | ≤0.03 | | **Zinc (Zn)** | ≤0.05 | | **Other Elements (Each)** | ≤0.03 | | **Other Elements (Total)** | ≤0.10 | *Note: The high purity composition (99.6% min aluminum) ensures excellent corrosion resistance, formability, and electrical conductivity.* **3. Physical Properties** | Property | Value | |----------|-------| | **Density** | 2.71 g/cm³ | | **Melting Point** | 645-655°C | | **Electrical Conductivity** | 62% IACS | | **Thermal Conductivity** | 234 W/(m·K) | | **Coefficient of Thermal Expansion** | 23.4 × 10⁻⁶/K (20-100°C) | | **Modulus of Elasticity** | 69 GPa | **4. Mechanical Properties (Typical for H14 Temper)** The H14 temper provides a half-hard condition with balanced mechanical properties. | Property | Value | |----------|-------| | **Tensile Strength** | 110-140 MPa | | **Yield Strength (0.2% Offset)** | 95-120 MPa | | **Elongation (% in 50mm)** | 8-15% | | **Hardness (Brinell)** | 32-38 HB | *Key Characteristics of H14 Temper:* * **Optimal Balance**: Excellent compromise between strength and formability * **Superior Corrosion Resistance**: Excellent resistance to atmospheric and chemical corrosion * **Good Workability**: Suitable for bending and moderate forming operations * **High Conductivity**: Excellent electrical and thermal conductivity due to high purity **5. Product Applications** 1060-H14 is primarily supplied as sheet, strip, and plate for various industrial and commercial applications. * **Architectural Applications**: Roofing sheets, wall panels, and decorative elements * **Electrical Components**: Busbars, conductive plates, and electrical enclosures * **Chemical Equipment**: Chemical tanks, processing vessels, and piping systems * **Food Processing**: Storage containers, processing equipment, and packaging materials * **Heat Exchangers**: Heat transfer fins and cooling components * **General Manufacturing**: Stampings, brackets, and light structural components * **Signage & Nameplates**: Industrial labels and identification plates **6. International Standards** 1060-H14 is recognized globally under various standardization systems. | Standard System | Designation | |-----------------|-------------| | **ISO** | Al99.6 H14 | | **EN (Europe)** | EN AW-1060 H14 | | **ASTM (USA)** | ASTM B209 1060 H14 | | **UNS (USA)** | UNS A91060 H14 | | **JIS (Japan)** | A1060 H14 | | **GB (China)** | 1060 H14 | --- **Summary** **1060-H14 Aluminum Alloy** represents a **half-hard temper** that provides an **optimal balance between strength and formability** in the 1060 aluminum series. With its high purity composition (99.6% Al), this alloy offers superior electrical and thermal conductivity, excellent corrosion resistance, and good workability. The H14 condition makes it particularly suitable for applications requiring moderate strength combined with adequate formability, serving as an ideal choice for architectural components, electrical applications, chemical equipment, and general manufacturing. Its balanced mechanical properties, combined with the inherent advantages of high-purity aluminum, make 1060-H14 one of the most versatile and widely used aluminum alloys across multiple industries.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1431 gallon liquid totes Special package is available on request.