Aluminum Silicon Oxide,CAS : 1302-93-8

E FORU specializes in producing high purity Aluminum Silicon Oxide,CAS : 1302-93-8 with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N. 99.99995% (6N5), and in some cases up to 99.99999% (7N) and 99.999999% (8N),Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 5 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas.Production of metallic carbide materials including boron Silicate, cobalt Silicate, chromium Silicate, hafnium Silicate, molybdenum Silicate, niobium Silicate, tantalum Silicate, titanium Silicate, vanadium Silicate, zirconium Silicate, and numerous others.Silicates are compounds containing a silicon-containing polyatomic anion. Most often, these anions feature a silicon atom in a tetrahedral arrangement such that it is surrounded by four oxygen atoms. These tetrahedra can occur singly, or joined together in various arrangements such as pairs or rings.Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.