Nichrome V,Nichrome V Sheet,UNS N06003,E FORU

British Specs:，American Specs:AMS 5676 Welding Wire AMS 5677 Welding Electrodes AMS 5682 Rods and Wire MIL-R-5031 Cl 7 MIL-E-6844 Cl7，German Specs:

**Product Introduction: Nichrome V Sheet / UNS N06003** **Overview** Nichrome V Sheet (UNS N06003) is a nickel-chromium alloy supplied in thin plate form, designed for high-temperature applications requiring excellent oxidation resistance, stable electrical properties, and good formability. This product combines the superior performance of Nichrome V with the versatility of sheet geometry, making it ideal for heating elements, thermal shields, and structural components in demanding environments. --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | 78.0 - 80.0 | | Chromium (Cr) | 19.0 - 21.0 | | Iron (Fe) | ≤ 1.0 | | Silicon (Si) | ≤ 1.0 | | Manganese (Mn) | ≤ 1.0 | | Carbon (C) | ≤ 0.15 | | Sulfur (S) | ≤ 0.015 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.40 g/cm³ (0.303 lb/in³) | | Melting Range | 1400–1420°C (2552–2588°F) | | Electrical Resistivity | 1.09 μΩ·m | | Temperature Coefficient of Resistance | 0.00013/°C | | Thermal Conductivity | 13.0 W/m·K | | Specific Heat Capacity | 450 J/kg·K | | Mean Coefficient of Thermal Expansion | 13.0 × 10⁻⁶/°C | | Modulus of Elasticity | 210 GPa (30.5 × 10⁶ psi) | --- **Mechanical Properties (Annealed Condition)** | Temperature | Tensile Strength | Yield Strength (0.2%) | Elongation | |--------------------|------------------|----------------------|------------| | Room Temperature | 860–965 MPa | 480–550 MPa | 25–35% | | 500°C (932°F) | 550–620 MPa | 320–380 MPa | 28–38% | | 800°C (1472°F) | 240–310 MPa | 170–210 MPa | 35–45% | | 1000°C (1832°F) | 110–140 MPa | 80–110 MPa | 40–50% | --- **Product Applications** - **Heating Elements**: Flat heating panels, strip heaters, and custom-shaped heating elements. - **Industrial Furnaces**: Heat shields, baffles, and liners for high-temperature furnaces. - **Electrical Components**: Resistor substrates, electrical contacts, and high-temperature circuitry. - **Consumer Appliances**: Heating plates for toasters, ovens, and industrial food equipment. - **Aerospace & Automotive**: Heat shields, exhaust thermal management, and sensor components. --- **International Standards & Specifications** - **ASTM**: - ASTM B168: Nickel-Chromium and Nickel-Chromium-Iron Alloy Plate, Sheet, and Strip. - ASTM B906: General Requirements for Flat-Rolled Nickel and Nickel Alloys. - **ISO**: - ISO 6208: Nickel and Nickel Alloys — Plate, Sheet, and Strip. - **European Standards**: - EN 10095: Heat Resisting Steels and Nickel Alloys. - DIN 17750: Nickel and Nickel Alloys — Plate, Sheet, and Strip. - **Other**: - IEC 60172: Test Procedure for Temperature Index Determination. --- **Sheet Specifications & Tolerances** - **Thickness**: 0.5 mm to 6.0 mm. - **Width**: Up to 1500 mm. - **Length**: Up to 4000 mm. - **Thickness Tolerance**: ±0.05 mm to ±0.1 mm (varies with thickness). - **Surface Finish**: Bright annealed, pickled, or cold-rolled. --- **Fabrication Notes** - **Machining**: Use carbide tools with adequate cooling. - **Welding**: TIG welding with matching filler (ERNiCr-3) under argon shielding. - **Forming**: Excellent cold formability in annealed condition; hot working recommended for severe deformation. - **Heat Treatment**: Stress relief at 650–750°C; full annealing at 850–950°C. --- **Quality Assurance** - Certified to EN 10204 3.1/3.2. - Compliance with RoHS and ISO 9001. - Full traceability from raw material to finished product. --- **Note** Nichrome V Sheet is widely used in applications requiring reliable performance at temperatures up to 1200°C. Its stable electrical resistivity and oxidation resistance make it a preferred material for heating elements and high-temperature structural parts. **Disclaimer** The information provided is for reference only. For critical applications, consult technical datasheets and relevant international standards. Actual properties may vary based on manufacturing processes and heat treatment.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3060 gallon liquid totes Special package is available on request.