Astroloy M,Astroloy M Strip,UNS N13017,E FORU

British Specs:，American Specs:AMS 5882 Forgings，German Specs:

### **Product Introduction: Astroloy M (UNS N13017) Strip** **Astroloy M (UNS N13017) Strip** is a premium powder metallurgy nickel-based superalloy supplied in thin, narrow strip form, representing one of the most technically advanced product forms of this high-performance material. Manufactured through sophisticated powder metallurgy processes followed by precision cold rolling and controlled thermal treatments, this strip product delivers exceptional mechanical properties and microstructural consistency in ultra-thin configurations. The strip configuration of Astroloy M enables the production of highly precise components for critical applications where minimal thickness, tight dimensional tolerances, and superior high-temperature performance are essential requirements for operational success in extreme environments. --- #### **Key Features & Advantages** * **Precision Thickness Control**: Maintains exceptional dimensional accuracy and uniform properties in thin gauges * **Superior Surface Quality**: Excellent surface finish suitable for high-precision applications * **Outstanding High-Temperature Strength**: Maintains mechanical integrity at temperatures up to 980°C (1800°F) * **Excellent Spring Properties**: Ideal for high-temperature spring applications requiring consistent performance * **Enhanced Formability**: Can be stamped, blanked, and formed into complex shapes in annealed condition * **Superior Microstructural Homogeneity**: PM processing ensures uniform, fine-grained structure throughout the strip --- #### **Chemical Composition (Typical Weight %)** | Element | Content (%) | Element | Content (%) | |---------|-------------|---------|-------------| | **Nickel (Ni)** | Balance | **Molybdenum (Mo)** | 4.5 - 5.5 | | **Chromium (Cr)** | 14.0 - 16.0 | **Aluminum (Al)** | 4.0 - 4.5 | | **Cobalt (Co)** | 16.0 - 18.0 | **Titanium (Ti)** | 3.4 - 3.8 | | **Carbon (C)** | 0.02 - 0.06 | **Boron (B)** | 0.015 - 0.030 | | **Zirconium (Zr)** | 0.025 - 0.050 | **Iron (Fe)** | ≤ 0.50 | | **Manganese (Mn)** | ≤ 0.10 | **Silicon (Si)** | ≤ 0.10 | | **Sulfur (S)** | ≤ 0.015 | **Copper (Cu)** | ≤ 0.10 | --- #### **Physical Properties** | Property | Metric Unit | Imperial Unit | |----------|-------------|---------------| | **Density** | 8.0 g/cm³ | 0.289 lb/in³ | | **Melting Range** | 1330 - 1380 °C | 2425 - 2515 °F | | **Thermal Expansion Coefficient** | 12.8 μm/m·°C (20-100°C) | 7.1 × 10⁻⁶ in/in·°F | | **Modulus of Elasticity** | 210 GPa | 30.5 × 10⁶ psi | | **Thermal Conductivity** | 11.5 W/m·K (100°C) | 80 Btu·in/hr·ft²·°F | | **Specific Heat** | 420 J/kg·K (20°C) | 0.10 Btu/lb·°F | --- #### **Mechanical Properties (Typical for Aged Condition)** | Property | Value (Metric) | Value (Imperial) | |----------|----------------|------------------| | **Tensile Strength, Ultimate** | 1300 - 1500 MPa | 189 - 218 ksi | | **Tensile Strength, Yield (0.2% Offset)** | 1000 - 1200 MPa | 145 - 174 ksi | | **Elongation at Break** | 10 - 15 % | 10 - 15 % | | **Hardness** | 36 - 42 HRC | 36 - 42 HRC | --- #### **International Standards** * **AMS 5592**: Specification for strip and foil (primary specification) * **AMS 6306**: Powder metallurgy nickel-base superalloy products * **ASTM B906**: General requirements for nickel alloy strip * **UNS N13017**: Unified Numbering System designation * **OEM Specifications**: Compliant with aerospace manufacturers' standards --- #### **Product Applications** **Aerospace & Defense:** - Turbine blade sealing strips and shims - High-temperature spring components - Sensor and instrumentation mounting elements - Electrical connector components for high-temperature environments - Seal segments and abradable seal components **Electronics & Instrumentation:** - High-temperature electronic connector springs - Sensor diaphragms and sensing elements - Lead frames for high-reliability electronics - Spring contacts for extreme environment connectors **Industrial Applications:** - High-temperature furnace components - Thermal processing equipment parts - Precision springs for elevated temperature service - Specialized fasteners and retaining elements --- **Disclaimer:** *Astroloy is a trademark associated with various high-performance alloy manufacturers. The information provided is for reference purposes only. Astroloy M strip properties are highly dependent on thickness, temper condition, and specific heat treatment. Professional engineering consultation and strict adherence to relevant specifications are essential for critical applications. Always consult manufacturer's technical data sheets for specific requirements.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3087 gallon liquid totes Special package is available on request.