Astroloy M,Astroloy M Foil,Shim,UNS N13017,E FORU

British Specs:，American Specs:AMS 5882 Forgings，German Specs:

### **Product Introduction: Astroloy M (UNS N13017) Foil & Shim** **Astroloy M (UNS N13017) Foil and Shim** represent the most refined product forms of this premium powder metallurgy nickel-based superalloy, engineered for extreme precision applications in advanced aerospace and high-temperature industries. These ultra-thin materials are manufactured through sophisticated powder metallurgy processes followed by precision cold rolling and controlled thermal treatments, delivering exceptional performance in applications where minimal thickness, precise dimensions, and superior high-temperature properties are critical. The foil and shim configurations of Astroloy M provide unparalleled solutions for thermal management, sealing, and spacing applications in environments where temperatures can reach 980°C (1800°F) and where conventional materials would rapidly degrade or fail. --- #### **Key Features & Advantages** * **Precision Thickness Control**: Maintains exceptional dimensional accuracy in ultra-thin gauges (typically 0.025-0.5mm) * **Superior High-Temperature Performance**: Retains mechanical properties and dimensional stability at temperatures up to 980°C (1800°F) * **Excellent Surface Quality**: Mirror-like surface finish with minimal imperfections for critical applications * **Outstanding Spring Properties**: Maintains spring characteristics and load-bearing capacity at elevated temperatures * **Optimized Thermal Management**: Excellent for heat shielding and thermal barrier applications * **Superior Microstructural Homogeneity**: PM processing ensures uniform, fine-grained structure throughout the material --- #### **Chemical Composition (Typical Weight %)** | Element | Content (%) | Element | Content (%) | |---------|-------------|---------|-------------| | **Nickel (Ni)** | Balance | **Molybdenum (Mo)** | 4.5 - 5.5 | | **Chromium (Cr)** | 14.0 - 16.0 | **Aluminum (Al)** | 4.0 - 4.5 | | **Cobalt (Co)** | 16.0 - 18.0 | **Titanium (Ti)** | 3.4 - 3.8 | | **Carbon (C)** | 0.02 - 0.06 | **Boron (B)** | 0.015 - 0.030 | | **Zirconium (Zr)** | 0.025 - 0.050 | **Iron (Fe)** | ≤ 0.50 | | **Manganese (Mn)** | ≤ 0.10 | **Silicon (Si)** | ≤ 0.10 | | **Sulfur (S)** | ≤ 0.015 | **Copper (Cu)** | ≤ 0.10 | --- #### **Physical Properties** | Property | Metric Unit | Imperial Unit | |----------|-------------|---------------| | **Density** | 8.0 g/cm³ | 0.289 lb/in³ | | **Melting Range** | 1330 - 1380 °C | 2425 - 2515 °F | | **Thermal Expansion Coefficient** | 12.8 μm/m·°C (20-100°C) | 7.1 × 10⁻⁶ in/in·°F | | **Modulus of Elasticity** | 210 GPa | 30.5 × 10⁶ psi | | **Thermal Conductivity** | 11.5 W/m·K (100°C) | 80 Btu·in/hr·ft²·°F | | **Specific Heat** | 420 J/kg·K (20°C) | 0.10 Btu/lb·°F | --- #### **Mechanical Properties (Typical for Aged Condition)** | Property | Value (Metric) | Value (Imperial) | |----------|----------------|------------------| | **Tensile Strength, Ultimate** | 1250 - 1450 MPa | 181 - 210 ksi | | **Tensile Strength, Yield (0.2% Offset)** | 950 - 1150 MPa | 138 - 167 ksi | | **Elongation at Break** | 8 - 15 % | 8 - 15 % | | **Hardness** | 34 - 40 HRC | 34 - 40 HRC | --- #### **International Standards** * **AMS 5592**: Specification for strip and foil (primary specification) * **AMS 6306**: Powder metallurgy nickel-base superalloy products * **ASTM B906**: General requirements for nickel alloy strip and foil * **UNS N13017**: Unified Numbering System designation * **OEM Specifications**: Compliant with major aerospace manufacturers' standards --- #### **Product Applications** **Aerospace & Defense:** - Turbine blade tip sealing shims - High-temperature gaskets and seals - Thermal protection foil systems - Heat shield components - Combustion chamber sealing elements - Rocket engine thermal management foils **Precision Engineering:** - High-temperature spring components - Sensor mounting shims - Precision spacers for elevated temperature service - Electrical insulation components - Thin-section thermal barriers **Specialized Industrial:** - Furnace heat shielding foils - Thermal processing equipment liners - High-temperature vacuum system components - Specialized instrumentation elements --- **Available Forms & Sizes:** - **Foil Thickness**: 0.025mm - 0.15mm (0.001" - 0.006") - **Shim Thickness**: 0.10mm - 0.50mm (0.004" - 0.020") - **Standard Widths**: 50mm - 300mm (2" - 12") - **Custom sizes and configurations available** --- **Disclaimer:** *Astroloy is a trademark associated with various high-performance alloy manufacturers. The information provided is for reference purposes only. Astroloy M foil and shim properties are highly dependent on thickness, temper condition, and specific heat treatment. These products represent specialized manufacturing achievements requiring advanced technical expertise. Professional engineering consultation and strict adherence to relevant specifications are essential for critical applications. Always consult manufacturer's technical data sheets for specific requirements and performance characteristics.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3091 gallon liquid totes Special package is available on request.