Alloy X,Inconel HX Foil,Shim,UNS N06002,E FORU

British Specs:，American Specs:AMS 5536 Sheet, Strip and Plate AMS 5754 Bar and Forgings AMS 5798 Welding Wire AMS 5587 Seamless Tube AMS 5588 Welded Tube，German Specs:

### **Product Datasheet: Alloy X / Inconel® HX Foil & Shim (UNS N06002)** **Alloy X** (commercially known as **Inconel® HX** and standardized as **UNS N06002**) is a nickel-chromium-iron-molybdenum superalloy specifically engineered for extreme high-temperature service. The **foil and shim** product forms of this solid-solution strengthened alloy provide exceptional performance in thin-gauge applications requiring superior high-temperature stability, oxidation resistance, and mechanical integrity. Available in thicknesses typically ranging from 0.001" to 0.020" (0.025mm to 0.5mm), these precision-rolled products offer excellent dimensional control, surface finish, and consistent mechanical properties, making them ideal for critical sealing, spacing, and thermal management applications. --- ### **1. Chemical Composition** The chemical composition of Inconel HX (UNS N06002) foil and shim conforms to the following specifications (balance is Nickel): | Element | Content (%) | | :--- | :--- | | **Nickel (Ni)** | Balance | | **Chromium (Cr)** | 20.5 - 23.0 | | **Iron (Fe)** | 17.0 - 20.0 | | **Molybdenum (Mo)** | 8.0 - 10.0 | | **Cobalt (Co)** | 0.5 - 2.5 | | **Tungsten (W)** | 0.2 - 1.0 | | **Carbon (C)** | 0.05 - 0.15 | | **Manganese (Mn)** | ≤ 1.00 | | **Silicon (Si)** | ≤ 1.00 | | **Phosphorus (P)** | ≤ 0.040 | | **Sulfur (S)** | ≤ 0.030 | | **Boron (B)** | ≤ 0.010 | * **Functional Significance of Key Elements:** * **Ni (Nickel)**: Provides the austenitic matrix for superior corrosion resistance and thermal stability * **Cr (Chromium)**: Enables protective oxide layer formation for oxidation resistance * **Mo & W (Molybdenum & Tungsten)**: Enhance solid-solution strengthening for high-temperature performance * **C (Carbon)**: Contributes to elevated temperature strength --- ### **2. Physical Properties** Characteristic physical properties for Inconel HX foil and shim: | Property | Metric Value | Imperial Value | | :--- | :--- | :--- | | **Density** | 8.22 g/cm³ | 0.297 lb/in³ | | **Melting Point** | 1260 - 1355 °C | 2300 - 2475 °F | | **Specific Heat (20°C)** | 455 J/kg·K | 0.109 Btu/lb·°F | | **Thermal Conductivity (20°C)** | 11.9 W/m·K | 82.7 Btu·in/hr·ft²·°F | | **Mean Coefficient of Thermal Expansion (20-1000°C)** | 14.0 μm/m·°C | 7.8 x10⁻⁶ in/in·°F | | **Modulus of Elasticity** | 205 GPa | 29.7 x 10⁶ psi | --- ### **3. Mechanical Properties** Typical mechanical properties for Inconel HX foil and shim: | Property | Foil (Annealed) | Shim (Hard Temper) | | :--- | :--- | :--- | | **Tensile Strength** | 550 - 690 MPa (80 - 100 ksi) | 895 - 1100 MPa (130 - 160 ksi) | | **Yield Strength (0.2% Offset)** | 240 - 415 MPa (35 - 60 ksi) | 790 - 1035 MPa (115 - 150 ksi) | | **Elongation** | 40 - 60% | 3 - 15% | | **Hardness** | 75 - 90 HRB | 25 - 40 HRC | --- ### **4. International Standards & Specifications** Inconel HX foil and shim comply with the following international standards: | Standard Body | Standard Designation | Product Form | | :--- | :--- | :--- | | **ASTM International** | **ASTM B435** | Plate, Sheet, and Strip | | **ASTM International** | **ASTM B906** | General Requirements for Flat-Rolled Nickel and Nickel Alloys | | **AMS** | **AMS 5759** | Bars, Forgings, and Rings (composition reference) | | **ASTM International** | **ASTM F4** | Custom requirements for thin gauge material | | **European Standard** | **EN 10095** | Heat resisting steels and nickel alloys | | **UNS** | **N06002** | Unified Numbering System | --- ### **5. Product Applications** **Foil Applications (Typically 0.001" - 0.005" thickness):** * **Aerospace & Defense:** * Thermal protection systems * Honeycomb core materials * High-temperature gaskets and seals * Radiation shields * **Electronics & Semiconductor:** * Vacuum furnace liners * Sputtering targets * High-temperature electrical insulation * Sensor protection layers * **Industrial Processing:** * High-temperature brazing backing * Heat treatment separation layers * Protective wrapping for sensitive components **Shim Applications (Typically 0.005" - 0.020" thickness):** * **Industrial Equipment:** * High-temperature gaskets and seals * Turbine clearance control shims * Alignment shims for furnace components * Thermal expansion compensation shims * **Automotive & Aerospace:** * Exhaust system gaskets * Turbocharger shims * Engine mounting shims * High-temperature spacer applications * **Power Generation:** * Gas turbine sealing shims * Heat exchanger gaskets * Boiler and furnace sealing components --- ### **6. Special Characteristics** * **Temperature Resistance**: Continuous service to 1200°C (2200°F) * **Oxidation Resistance**: Excellent resistance to scaling and oxidation * **Formability**: Good in annealed condition for complex shapes * **Weldability**: Can be welded using standard nickel alloy techniques * **Surface Finish**: Available with various surface finishes including matte, 2B, and polished --- **Technical Note & Disclaimer:** *Inconel® is a registered trademark of Special Metals Corporation, a PCC company. Foil and shim materials are typically supplied in specific tempers (annealed, hard, spring) to meet application requirements. Material selection should consider both mechanical properties and fabrication needs. Always consult with material specialists for critical applications requiring precise performance characteristics.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1856 gallon liquid totes Special package is available on request.