Alloy 713C,Inconel 713C Strip,,E FORU

British Specs:，American Specs:，German Specs:

### **Product Introduction: Alloy 713C / INCONEL® 713C Strip** #### **Overview** INCONEL® 713C strip is a precision-rolled nickel-chromium alloy specifically engineered for high-temperature applications requiring exceptional strength and oxidation resistance in thin-gauge configurations. This precipitation-hardenable material maintains outstanding mechanical properties and structural stability at temperatures up to 980°C (1800°F), offering superior performance in demanding aerospace, industrial, and electronic applications. --- ### **Key Features & Advantages** - **Excellent high-temperature strength** and creep resistance in thin sections - **Good oxidation resistance** up to 980°C (1800°F) - **Precise dimensional control** with tight thickness tolerances - **Superior surface quality** for critical applications - **Excellent formability** and spring properties in heat-treated condition - **Consistent mechanical properties** across the strip width --- ### **Chemical Composition (Typical % Weight)** | Element | Content (%) | Role in Alloy | |---------|-------------|---------------| | **Nickel (Ni)** | Balance | Matrix element providing high-temperature strength | | **Chromium (Cr)** | 12.0-14.0 | Oxidation and corrosion resistance | | **Molybdenum (Mo)** | 3.8-5.2 | Solid solution strengthening | | **Niobium (Nb)** | 1.8-2.5 | Formation of strengthening phases | | **Titanium (Ti)** | 0.5-1.0 | Precipitation hardening element | | **Aluminum (Al)** | 5.5-6.5 | Forms protective oxide scale and gamma prime phase | | **Iron (Fe)** | 1.0 max | - | | **Zirconium (Zr)** | 0.05-0.15 | Improves creep properties | | **Boron (B)** | 0.005-0.015 | Grain boundary strengthening | | **Carbon (C)** | 0.08-0.20 | Carbide formation for strength | | **Manganese (Mn)** | 0.25 max | - | | **Silicon (Si)** | 0.50 max | - | --- ### **Physical Properties** | Property | Value | |---------|-------| | **Density** | 7.91 g/cm³ (0.286 lb/in³) | | **Melting Range** | 1260-1340°C (2300-2445°F) | | **Thermal Conductivity** | 13.4 W/m·K at 20°C | | **Thermal Expansion** | 14.2 μm/m·K at 20-100°C | | **Specific Heat** | 460 J/kg·K at 20°C | | **Modulus of Elasticity** | 206 GPa (30 x 10^6 psi) | | **Electrical Resistivity** | 1.25 μΩ·m at 20°C | --- ### **Mechanical Properties (Strip - Aged Condition)** #### **Room Temperature Properties** | Property | Value | |---------|-------| | **Tensile Strength** | 850-1050 MPa (123-152 ksi) | | **Yield Strength (0.2% Offset)** | 680-850 MPa (99-123 ksi) | | **Elongation** | 10-20% | | **Hardness** | HRC 28-36 | | **Fatigue Strength** | 350-420 MPa (51-61 ksi) | #### **Elevated Temperature Properties** - **Stress Rupture Strength**: 240 MPa (35 ksi) at 815°C (1500°F) for 100 hours - **Creep Strength**: Excellent performance in thin sections - **Thermal Fatigue Resistance**: Superior performance under thermal cycling - **Structural Stability**: Maintains properties during prolonged exposure --- ### **International Standards** | Standard | Specification | Application | |----------|---------------|-------------| | **ASTM** | B168 | Strip and Sheet | | **AMS** | AMS 5590 | Strip and Foil | | **UNS** | N07713 | Unified Numbering System | | **GE** | SPS M-71 | General Electric Specification | --- ### **Product Specifications** #### **Strip Dimensions & Tolerances** - **Thickness Range**: 0.05mm to 2.0mm (0.002" to 0.078") - **Thickness Tolerance**: ±0.005mm to ±0.03mm - **Width Range**: 2mm to 600mm (0.08" to 24") - **Width Tolerance**: ±0.1mm to ±0.5mm #### **Available Conditions** - **Solution Annealed**: Optimal for severe forming operations - **¼ Hard**: For moderate forming requirements - **½ Hard**: Balance of strength and formability - **Full Hard**: Maximum strength for spring applications - **Precipitation Hardened**: Optimized mechanical properties #### **Surface Finish Options** - **Bright Annealed**: Smooth, reflective surface - **Cold Rolled**: Standard matte finish - **Polished**: Mirror finish for special applications - **Temper Rolled**: Controlled surface texture --- ### **Heat Treatment** **Standard Heat Treatment Cycle:** - **Solution Treatment**: 1120-1150°C (2050-2100°F), rapid cooling - **Aging Treatment**: 980-1010°C (1800-1850°F) for 4-8 hours, air cooling **Special Considerations for Strip:** - Precise temperature control for thin gauges - Continuous heat treatment for uniform properties - Stress relief for flatness control - Atmosphere control to maintain surface quality --- ### **Product Applications** #### **Aerospace & Defense** - **Turbine Engine Components**: Seal strips and shroud segments - **Aircraft Structural Components**: High-temperature brackets and clips - **Rocket Motor Parts**: Thermal protection elements - **Instrumentation**: Sensor mounting strips and components #### **Electronic & Electrical Applications** - **Heating Elements**: High-temperature electrical heating strips - **Resistance Components**: Precision electrical resistance elements - **Thermocouple Components**: High-temperature sensing elements - **Electronic Connectors**: High-temperature contact springs #### **Industrial Applications** - **Heat Treatment Fixtures**: Brazing fixtures and support strips - **Furnace Components**: Radiant heating strips and elements - **Chemical Processing**: Gaskets and seals for aggressive environments - **Precision Components**: Shims and spacers for high-temperature use #### **Specialized Applications** - **Glass Manufacturing**: Forming tools and support elements - **Semiconductor Processing**: High-temperature process fixtures - **Research Equipment**: High-temperature test specimens - **Medical Devices**: Specialized surgical instrument components --- ### **Fabrication & Processing** #### **Stamping and Blanking** - Suitable for high-speed precision stamping - Progressive die capabilities for complex shapes - Fine blanking for critical edge quality - Minimal tool wear with proper die materials #### **Forming Operations** - **Deep Drawing**: Good performance in annealed condition - **Bending**: Minimum bend radius 2T (annealed) to 4T (hard) - **Roll Forming**: Suitable for continuous processing - **Embossing**: Good detail reproduction capability #### **Joining Methods** - **Resistance Welding**: Excellent weldability - **Laser Welding**: Precision joining capability - **Brazing**: Compatible with high-temperature brazing alloys - **Adhesive Bonding**: With proper surface preparation --- ### **Quality Assurance & Testing** #### **Dimensional Control** - **Laser Micrometry**: Continuous thickness monitoring - **Surface Roughness**: Precise measurement capability - **Flatness Testing**: Stress relief for critical applications - **Edge Condition**: Controlled burr and edge quality #### **Material Testing** - **Tensile Testing**: Longitudinal and transverse properties - **Hardness Mapping**: Uniformity verification - **Microstructural Analysis**: Grain size and phase distribution - **Surface Quality**: Visual and microscopic examination #### **Specialized Testing** - **Springback Analysis**: Forming characteristic evaluation - **Fatigue Testing**: Cyclic performance verification - **Thermal Cycling**: High-temperature performance validation - **Oxidation Testing**: Weight gain measurements at temperature --- ### **Packaging & Handling** #### **Standard Packaging** - **Coil Cores**: 75mm, 150mm, 300mm diameters - **Protective Wrapping**: VCI paper and polyethylene - **Edge Protection**: Custom edge guards available - **Packing**: Wooden crates or steel boxes #### **Special Handling** - **Clean Room Packaging**: Class 1000 or better - **Dry Atmosphere**: Humidity-controlled packaging - **Static Shielding**: For electronic applications - **Custom Slitting**: Precision width tolerances --- ### **Why Choose Our INCONEL 713C Strip?** - **Precision Manufacturing**: State-of-the-art rolling mills - **Quality Assurance**: Comprehensive testing and certification - **Technical Expertise**: Application engineering support - **Custom Solutions**: Tailored tempers and dimensions - **Global Compliance**: International standard certification - **Proven Performance**: Established track record in critical applications **Contact us today to discuss your specific INCONEL 713C strip requirements. Our technical team provides comprehensive support from material selection through fabrication processing.** --- *Disclaimer: INCONEL® is a registered trademark of Special Metals Corporation. The information provided is for technical reference only. Final material selection should be verified through appropriate testing and engineering analysis for specific applications.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2996 gallon liquid totes Special package is available on request.