Alloy 700,Inconel 700 Rod,,E FORU

British Specs:，American Specs:，German Specs:

**Product Introduction: Alloy 700 / INCONEL® 700 Rod** **Overview** INCONEL® 700 (Alloy 700) rod is a premium nickel-chromium alloy specifically engineered for exceptional high-temperature performance. This precipitation-hardenable material delivers outstanding strength, oxidation resistance, and structural stability in extreme environments up to 980°C (1800°F), making it ideal for critical aerospace and industrial applications. --- **Key Features & Advantages** - Superior high-temperature strength and creep resistance - Excellent oxidation resistance up to 980°C (1800°F) - Precipitation hardenable for optimized mechanical properties - Good microstructural stability during long-term high-temperature exposure - Excellent machinability in heat-treated condition --- **Chemical Composition (Typical % Weight)** | Element | Content (%) | |---------|-------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 14.0-17.0 | | Molybdenum (Mo) | 3.25-4.25 | | Titanium (Ti) | 2.25-2.75 | | Aluminum (Al) | 2.25-2.75 | | Iron (Fe) | 1.0 max | | Cobalt (Co) | 1.0 max | | Carbon (C) | 0.12 max | | Boron (B) | 0.006-0.015 | | Manganese (Mn) | 0.50 max | | Silicon (Si) | 0.50 max | --- **Physical Properties** | Property | Value | |---------|-------| | Density | 7.81 g/cm³ (0.282 lb/in³) | | Melting Point | 1330-1360°C (2425-2480°F) | | Thermal Conductivity | 14.2 W/m·K at 20°C | | Thermal Expansion | 13.7 μm/m·K at 20-100°C | | Specific Heat | 456 J/kg·K at 20°C | --- **Mechanical Properties (Rod - Heat Treated Condition)** | Property | Value | |---------|-------| | Tensile Strength | 1240-1380 MPa (180-200 ksi) | | Yield Strength (0.2% Offset) | 860-1030 MPa (125-150 ksi) | | Elongation | 15-25% | | Reduction of Area | 20-35% | | Hardness | HRC 32-40 | **Elevated Temperature Properties** - Maintains high tensile strength up to 870°C (1600°F) - Excellent stress-rupture properties at 815°C (1500°F) - Good fatigue strength under thermal cycling conditions --- **International Standards** | Standard | Specification | |----------|---------------| | UNS | N07700 | | ASTM | B637 (Rod, Bar, and Wire) | | AMS | AMS 5547 (Bar and Forgings) | | Proprietary | INCONEL® Alloy 700 | --- **Heat Treatment** **Standard Cycle:** - Solution Treatment: 980-1010°C (1800-1850°F), rapid cool - Aging: 705-760°C (1300-1400°F) for 16-24 hours, air cool --- **Product Applications** **Aerospace & Defense** - Gas turbine blades and vanes - Turbine disks and shafts - Afterburner components - Rocket motor parts - High-temperature fasteners **Industrial Applications** - Nuclear reactor components - Heat treatment fixtures - High-temperature testing equipment - Chemical processing hardware - Power generation turbine parts --- **Manufacturing Capabilities** **Rod Specifications** - Diameter Range: 3mm to 300mm (0.125" to 12") - Length: Standard random lengths or cut-to-size - Surface Finish: Hot finished, turned, or centerless ground - Straightness: Commercial or precision tolerances **Quality Assurance** - Full traceability with mill certifications - Ultrasonic testing available - Chemical and mechanical property verification - Microstructural examination --- **Machining & Fabrication** - Machine in annealed condition, then heat treat - Use positive rake angles and rigid setups - Carbide tools recommended - Adequate cooling and lubrication required - Good weldability using matching filler metals --- **Why Choose Our INCONEL 700 Rod?** - Strict adherence to international standards - Comprehensive size range and processing options - Technical support for material selection - Competitive pricing and reliable delivery - Full certification and quality documentation **Contact us today for technical specifications and quotation for INCONEL 700 rod products.** --- *Disclaimer: INCONEL® is a registered trademark of Special Metals Corporation. Information provided is for technical reference only. Final material selection should be verified through appropriate testing and engineering analysis.*

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2964 gallon liquid totes Special package is available on request.