,FM-82 Strip,UNS N06082,E FORU

British Specs:，American Specs:AMS 5836 Welding Wire，German Specs:

**Product Introduction: FM-82 Strip / UNS N06082** **Overview** FM-82 Strip is a nickel-chromium-molybdenum-niobium alloy supplied in thin, precision-rolled strip form, classified under UNS N06082. This product form offers exceptional dimensional accuracy, superior surface finish, and excellent fabricability, making it ideal for precision components requiring high corrosion resistance and reliable performance in demanding environments. **Key Characteristics** - Precision thickness control with tight tolerances - Superior surface finish quality - Excellent corrosion resistance in various environments - Good high-temperature stability up to 1100°C - Excellent formability and spring properties - Consistent mechanical properties throughout length - Good weldability and joinability --- **Chemical Composition (Weight %)** | Element | Content (%) | |------------------|-----------------| | Nickel (Ni) | Balance | | Chromium (Cr) | 18.0 - 22.0 | | Iron (Fe) | ≤ 3.0 | | Molybdenum (Mo) | 2.0 - 4.0 | | Niobium (Nb) | 1.5 - 4.0 | | Titanium (Ti) | ≤ 1.0 | | Manganese (Mn) | ≤ 1.0 | | Silicon (Si) | ≤ 0.75 | | Carbon (C) | ≤ 0.10 | | Phosphorus (P) | ≤ 0.03 | | Sulfur (S) | ≤ 0.015 | --- **Physical Properties** | Property | Value | |-------------------------------|---------------------------| | Density | 8.28 g/cm³ (0.299 lb/in³) | | Melting Range | 1350-1400°C (2460-2550°F) | | Thermal Conductivity | 10.1 W/m·K (at 100°C) | | Specific Heat Capacity | 430 J/kg·K (at 20°C) | | Electrical Resistivity | 1.18 μΩ·m | | Coefficient of Thermal Expansion | 13.5 × 10⁻⁶/°C (20-300°C) | | Modulus of Elasticity | 205 GPa (29.7 × 10⁶ psi) | --- **Mechanical Properties (Annealed Condition)** | Property | Thin Strip (0.1-0.5mm) | Standard Strip (0.5-2.0mm) | |---------------------------|------------------------|----------------------------| | Tensile Strength | 700-780 MPa | 690-760 MPa | | Yield Strength (0.2% Offset) | 320-400 MPa | 310-380 MPa | | Elongation | 35-45% | 40-50% | | Hardness (HV) | 180-220 | 170-210 | --- **Product Applications** **Electronics & Electrical** - Lead frames and connectors - Spring contacts and terminals - Battery components - Semiconductor packaging **Aerospace & Defense** - Precision springs - Sensor components - Shielding elements - Instrumentation parts **Chemical Processing** - Gaskets and seals - Filter elements - Sensor diaphragms - Precision valve components **Medical Devices** - Surgical instrument components - Implantable device parts - Medical spring elements - Diagnostic equipment parts **Automotive** - Fuel system components - Sensor elements - Electrical connectors - Emission control parts --- **International Standards & Specifications** **ASTM Standards** - ASTM B906: Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip **Aerospace Standards** - AMS 5599: Nickel Alloy, Corrosion and Heat-Resistant, Strip **International Standards** - ISO 6208: Nickel and nickel alloys — Plate, sheet and strip - DIN 17750: Nickel and nickel alloys - Plate, sheet and strip **Quality Standards** - EN 10204 3.1/3.2 Material Certification - Customer-specific requirements --- **Strip Specifications & Dimensions** **Available Forms** - Cold-rolled strip - Annealed condition - Hard and spring tempers - Special surface finishes **Size Range** - Thickness: 0.05mm to 2.0mm - Width: 2mm to 600mm - Length: Coils or cut lengths - Custom sizes available **Tolerances** - Thickness: ±0.005mm - Width: ±0.1mm - Camber: 1mm per meter max - Flatness: To customer requirements --- **Fabrication & Processing** **Forming Operations** - Excellent for deep drawing - Good for stamping and blanking - Suitable for photo-etching - Spring temper available for formed parts **Heat Treatment** - Solution annealing: 1150-1200°C - Stress relief: 870-900°C - Protective atmosphere recommended **Joining Methods** - Resistance welding suitable - TIG and laser welding applicable - Brazing with nickel-based filler metals - Adhesive bonding possible --- **Quality Assurance** **Testing & Certification** - Chemical analysis certification - Mechanical properties testing - Surface quality inspection - Dimensional verification - Edge condition examination - Special testing available **Surface Quality** - Bright annealed finish - Matte finish available - Special polished surfaces - Custom surface treatments --- **Note** FM-82 Strip offers exceptional precision and consistency for high-volume manufacturing of critical components. The material's combination of corrosion resistance, mechanical properties, and fabricability makes it suitable for the most demanding applications in various industries. **Disclaimer** The information provided is for reference purposes. Actual properties may vary based on manufacturing process and heat treatment. For critical applications, consult manufacturer's technical data sheets and applicable standards. Performance characteristics should be verified for specific applications.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3048 gallon liquid totes Special package is available on request.