Ammonium Hexafluoroaluminate,CAS : 7784-19-2

E FORU specializes in producing high purity Ammonium Hexafluoroaluminate,CAS : 7784-19-2 with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N. 99.99995% (6N5), and in some cases up to 99.99999% (7N) and 99.999999% (8N),Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 11 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas.Production of metallic carbide materials including cobalt fluoride, chromium fluoride, hafnium fluoride, molybdenum fluoride, niobium fluoride, tantalum fluoride, titanium fluoride, vanadium fluoride, zirconium fluoride, and numerous others.The fluoride ion is the anion of fluorine, F-, and fluorides are compounds which contain this anion. Metallic mono-, di, and trifluorides usually exhibit ionic bonding, pentafluorides and higher exhibit covalent bonding, and tetrafluorides contain bonds with intermediate properties. Ionic-bonded fluorides may be soluble or insoluble: alkali fluorides are soluble, alkali earth metals form insoluble fluorides, transition metal difluorides are often soluble, and trifluorides are insoluble. An exception to some of these trends is beryllium difluoride, which features bonds with partially covalent character and the crystalline structure of a covalently bonded network solid, yet is soluble in water..Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.