Barium PerchlorateCAS #: 13465-95-7

Synonyms 

Barium diperchlorate; barium(2+) diperchlorate; Barium perchlorate, anhydrous; Perchloric acid, barium salt

Bariumperchlorate (6CI);
Perchloric acid, barium salt (8CI,9CI);
Bariumdiperchlorate;
Barium perchlorate (Ba(ClO4)2);
CPS 55R

Compound Formula: BaCl2O8 

Molecular Weight: 336.24 

Appearance: White powder, granules, or chunks 

Melting Point: 505 °C 

Boiling Point: N/A 

Density: 3.20 g/cm3 

Solubility in H2O: N/A 

Exact Mass: 335.80227 

Monoisotopic Mass: 335.80227

Health & Safety Information

 Signal Word: Danger 

Hazard Statements: H271-H302-H332 

Hazard Codes: O,Xn 

Risk Codes: 9-20/22 

Safety Statements: 27 

RTECS Number: SC7550000 

Transport Information: UN 1447 5.1/PG 2 

WGK Germany: 3

Storage method for barium perchlorate (13465-95-7):

Storage method for barium perchlorate (13465-95-7):

Mixing with flammable substances or rapid heating may cause an explosion.Mixing with flammable substances or rapid heating may cause an explosion. Store in a cool, well-ventilated warehouse. Store in a cool, well-ventilated warehouse. The warehouse temperature should not exceed 30℃, and the relative humidity should not exceed 80%. Keep away from fire sources and heat sources. The warehouse temperature should not exceed 30℃, and the relative humidity should not exceed 80%. The packaging must be sealed to prevent moisture. Keep away from fire sources and heat sources. It should be stored separately from reducing agents, alcohols, flammable substances, and edible chemicals. The packaging must be sealed to prevent moisture. Avoid mixing. Appropriate materials should be available to contain any leakage at the storage area. 

Safety measures:

 It should be stored separately from reducing agents, alcohols, flammable substances, and edible chemicals. Avoid mixing.Isolate the contaminated area and restrict access. Appropriate materials should be available to contain any leakage at the storage area. 

Safety measures:

 It is recommended that emergency responders wear dust masks, protective suits, and rubber gloves.Isolate the contaminated area and restrict access. It is recommended that emergency responders wear dust masks, protective suits, and rubber gloves. Avoid contact between the leaked substance and flammable materials (such as wood, paper, oil, etc.). Avoid contact between the leaked substance and flammable materials (such as wood, paper, oil, etc.). Do not touch the broken containers and the leaked substance before putting on appropriate protective clothing. Do not touch the broken containers and the leaked substance before putting on appropriate protective clothing. Try to cut off the source of the leak. Try to cut off the source of the leak. Use clean shovels to collect the leaked substance and place it in clean, dry, and loosely capped containers. Move the containers away from the leakage area. 

 Use clean shovels to collect the leaked substance and place it in a clean, dry, and loosely capped container.Enclosed operation, enhanced ventilation. Move the container away from the leakage area. 

Enclosed operation, enhanced ventilation. Operators must undergo specialized training and strictly follow operating procedures. Operators must undergo specialized training and strictly follow operating procedures. It is recommended that operators wear head-covering type electrically-powered air-supplied filtering dust-proof respirators, wear polyethylene protective suits, and wear rubber gloves. It is recommended that operators wear head-covering type electrically-powered air-supplied filtering dust-proof respirators, wear polyethylene protective suits, and wear rubber gloves. Keep away from fire sources and heat sources. Smoking is strictly prohibited in the workplace. Keep away from fire sources and heat sources. Keep away from flammable and combustible substances. Avoid generating dust. Smoking is strictly prohibited in the workplace. Avoid contact with reducing agents and alcohols. Handle with care, and prevent damage to packaging and containers. Keep away from flammable and combustible substances. Prohibit vibration, impact and friction. Avoid generating dust. Avoid contact with reducing agents and alcohols. Equip with corresponding types and quantities of fire-fighting equipment and leakage emergency handling devices. Containers that have been emptied may still contain harmful substances. 

 Handle with care, and prevent damage to packaging and containers.Other:

 Prohibit vibration, impact and friction.Inhalation method: Inhalation, ingestion.

 Equipped with corresponding types and quantities of fire-fighting equipment and leakage emergency handling devices.This product is irritating to the respiratory tract, eyes and skin. Empty containers may still contain harmful substances. 

Other:

Inhalation method: Inhalation, ingestion.

This product is irritating to the respiratory tract, eyes and skin. Oral ingestion causes salivation, vomiting, abdominal spastic pain, slow pulse, elevated blood pressure, decreased blood potassium, possible gastrointestinal bleeding, followed by progressive paralysis of muscles and myocardial damage. Severe cases may die from arrhythmia and paralysis of respiratory muscles.

 Oral ingestion causes salivation, vomiting, abdominal spastic pain, slow pulse, elevated blood pressure, decreased blood potassium, possible gastrointestinal bleeding, followed by progressive paralysis of muscles and myocardial damage. Severe cases may die from arrhythmia and respiratory muscle paralysis.

Skin contact: Immediately remove contaminated clothing and rinse with plenty of flowing water for 20-30 minutes. If there is discomfort, seek medical attention.

Skin contact: Immediately remove contaminated clothing and rinse with plenty of flowing water for 20-30 minutes. If there is discomfort, seek medical attention.

In eyes: Lift the eyelid and rinse with flowing water or physiological saline.In eyes: Lift the eyelid and rinse with flowing water or physiological saline. If there is discomfort, seek medical attention.

 If there is discomfort, seek medical attention.

Inhalation: Quickly leave the scene to a fresh air area.Inhalation: Quickly leave the scene to a fresh air area. Keep the airway clear. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing is difficult, administer oxygen. If breathing and heartbeat stop, perform cardiopulmonary resuscitation immediately. If breathing and heartbeat stop, perform cardiopulmonary resuscitation immediately. Seek medical attention.

 Seek medical attention.

Dangerous state: Strong oxidizer.Dangerous state: Strong oxidizer. Mixing with reducing agents, organic substances, flammable substances such as sulfur, phosphorus or metal powders can form explosive mixtures. Mixing with reducing agents, organic substances, flammable substances such as sulfur, phosphorus or metal powders can form explosive mixtures. Decomposition upon heating releases oxygen.

Fire handling: This product is non-flammable. Decomposition upon heating releases oxygen.

 Choose the appropriate extinguishing agent based on the cause of the fire.Fire handling: This product is non-flammable. Choose the appropriate fire extinguishing agent based on the cause of the fire. Fire prevention precautions and measures: Firefighters must wear air respirators, wear full-body fireproof and toxic protection suits, and extinguish the fire from the upwind direction. Try to remove the container from the fire scene to an open area. Spray water to keep the container in the fire site cool until the fire is extinguished. Fire prevention precautions and measures: Firefighters must wear air respirators, wear full-body fireproof and toxic protection suits, and extinguish the fire from the upwind direction. Mixing with combustibles in the fire scene will cause an explosion. Try to remove the container from the fire scene to an open area. Firefighters must operate in an explosion-proof shelter. Do not use sand to cover. Spray water to keep the container in the fire site cool until the fire is extinguished. Mixing with combustibles in the fire scene will cause an explosion. Firefighters must operate in an explosion-proof shelter. Do not use sand to cover.

Chemical Identifiers 

Linear Formula: Ba(ClO4)2 

Pubchem CID: 61623 

MDL Number: MFCD00003440 

EC No.: 236-710-4 

IUPAC Name: barium(2+); diperchlorate 

Beilstein/Reaxys No.: N/A 

SMILES: [Ba+2].O=Cl(=O)(=O)[O-].[O-]Cl(=O)(=O)=O 

InchI Identifier: InChI=1S/Ba.2ClHO4/c;2*2-1(3,4)5/h;2*(H,2,3,4,5)/q+2;;/p-2 

InchI Key: OOULUYZFLXDWDQ-UHFFFAOYSA-L 

 Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 591 gallon liquid totes Special package is available on request.