5005-H36 Aluminum alloy,Aluminum 5005-H36 alloy,E FORU

### **Product Introduction: Aluminum 5005-H36 Alloy** **Overview** Aluminum 5005-H36 Alloy is a strain-hardened and stabilized aluminum-magnesium alloy in the H36 temper condition, representing a three-quarter hard state with enhanced stability. This temper provides high strength and stiffness while maintaining adequate formability for basic fabrication operations, combined with improved dimensional stability for long-term performance reliability. --- ### **1. Chemical Composition (Typical Weight %)** | Element | Content (%) | |---------|-------------| | **Aluminum (Al)** | Balance | | **Magnesium (Mg)** | 0.50 - 1.1 | | **Iron (Fe)** | ≤ 0.45 | | **Silicon (Si)** | ≤ 0.30 | | **Copper (Cu)** | ≤ 0.05 | | **Manganese (Mn)** | ≤ 0.20 | | **Zinc (Zn)** | ≤ 0.20 | | **Chromium (Cr)** | ≤ 0.10 | | **Other Elements** | ≤ 0.05 each | | **Total Others** | ≤ 0.15 | --- ### **2. Physical Properties** | Property | Value / Description | |----------|---------------------| | **Density** | 2.70 g/cm³ | | **Melting Range** | 632 - 652 °C | | **Electrical Conductivity** | 43-48% IACS | | **Thermal Conductivity** | 173-193 W/m·K | | **Coefficient of Thermal Expansion** | 23.6 × 10⁻⁶/°C | | **Modulus of Elasticity** | 69 GPa | | **Specific Heat Capacity** | 0.90 J/g·°C | --- ### **3. Mechanical Properties (H36 Temper Condition)** | Property | Value Range | |----------|-------------| | **Tensile Strength** | 180-210 MPa | | **Yield Strength (0.2% Offset)** | 155-185 MPa | | **Elongation (in 50mm)** | 2-6% | | **Hardness (Brinell)** | 48-58 HB | | **Shear Strength** | 118-138 MPa | | **Fatigue Strength** | 82-97 MPa | | **Bend Radius (90°)** | 1.5-2.5t | --- ### **4. International Standards** | Standard Body | Designation | |---------------|-------------| | **Aluminum Association (AA)** | AA 5005-H36 | | **European Standard (EN)** | EN AW-5005-H36 | | **ISO** | AlMg1 H36 (ISO 209) | | **UNS** | A95005 | | **ASTM** | B209 | --- ### **5. Product Applications** **Structural Applications:** - Building structural panels - Support brackets and frames - Reinforcing members - Load-bearing components - Chassis elements **Transportation Industry:** - Truck body panels - Trailer side walls - Vehicle structural components - Railway carriage panels - Marine structural parts **Electrical Applications:** - High-strength busbars - Electrical structural components - Switchgear enclosures - Transformer covers - Power distribution housings **Industrial Equipment:** - Machine guard panels - Equipment enclosures - Industrial flooring - Platform components - Heavy-duty storage systems --- ### **6. Key Characteristics & Advantages** - **High Strength**: Three-quarter hard condition with substantial strength - **Enhanced Stability**: Improved dimensional stability and property retention - **Good Stiffness**: Excellent resistance to bending and deformation - **Fatigue Resistance**: Suitable for dynamic loading applications - **Surface Durability**: Good resistance to abrasion and wear - **Corrosion Performance**: Maintains excellent corrosion resistance - **Thermal Stability**: Stable properties in varying temperature conditions --- ### **7. H36 Temper Specific Features** **Stabilization Benefits:** - Reduced age softening tendency - Minimal property changes over time - Improved creep resistance - Low thermal expansion characteristics - Consistent performance in service **Manufacturing Advantages:** - Predictable springback characteristics - Good blanking and shearing quality - Excellent flatness retention - Suitable for welding with proper procedures - Maintains dimensional accuracy --- ### **8. Processing Guidelines** **Forming Operations:** - Limited to simple bends with minimum radius of 1.5t - Suitable for straight bending and mild forming - Not recommended for deep drawing operations - Requires higher bending forces - Springback compensation necessary **Joining Methods:** - TIG and MIG welding with proper technique - Resistance welding suitable - Mechanical fastening preferred for structural applications - Adhesive bonding with proper surface preparation - Requires pre-treatment for optimal bonding **Finishing Operations:** - Good for anodizing with proper surface preparation - Suitable for painting and powder coating - Can be chemically treated - Accepts mechanical finishing - Surface cleaning essential before finishing **Thermal Considerations:** - Stable up to approximately 150°C - Maintains properties in outdoor applications - Suitable for temperature-varying environments - Resists natural aging effects **Disclaimer:** The information provided is for reference purposes only. The H36 temper offers high strength with good stability characteristics, making it suitable for structural applications requiring reliable long-term performance. Properties may vary depending on manufacturing processes, product form, and thickness. For critical applications, consult technical data sheets from material suppliers and conduct appropriate testing. The stabilization process provides enhanced reliability for applications where dimensional stability and property consistency are crucial.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1776 gallon liquid totes Special package is available on request.