5005-H14 Aluminum alloy,Aluminum 5005-H14 alloy,E FORU

### **Product Introduction: Aluminum 5005-H14 Alloy** **Overview** Aluminum 5005-H14 Alloy is a strain-hardened aluminum-magnesium alloy in the H14 temper condition, indicating a half-hard state achieved through controlled cold working. This temper provides an optimal balance of strength and formability, offering improved mechanical properties over softer tempers while maintaining adequate workability for most forming operations. --- ### **1. Chemical Composition (Typical Weight %)** | Element | Content (%) | |---------|-------------| | **Aluminum (Al)** | Balance | | **Magnesium (Mg)** | 0.50 - 1.1 | | **Iron (Fe)** | ≤ 0.45 | | **Silicon (Si)** | ≤ 0.30 | | **Copper (Cu)** | ≤ 0.05 | | **Manganese (Mn)** | ≤ 0.20 | | **Zinc (Zn)** | ≤ 0.20 | | **Chromium (Cr)** | ≤ 0.10 | | **Other Elements** | ≤ 0.05 each | | **Total Others** | ≤ 0.15 | --- ### **2. Physical Properties** | Property | Value / Description | |----------|---------------------| | **Density** | 2.70 g/cm³ | | **Melting Range** | 632 - 652 °C | | **Electrical Conductivity** | 46-51% IACS | | **Thermal Conductivity** | 180-200 W/m·K | | **Coefficient of Thermal Expansion** | 23.6 × 10⁻⁶/°C | | **Modulus of Elasticity** | 69 GPa | | **Specific Heat Capacity** | 0.90 J/g·°C | --- ### **3. Mechanical Properties (H14 Temper Condition)** | Property | Value Range | |----------|-------------| | **Tensile Strength** | 155-185 MPa | | **Yield Strength (0.2% Offset)** | 130-160 MPa | | **Elongation (in 50mm)** | 4-10% | | **Hardness (Brinell)** | 41-51 HB | | **Shear Strength** | 105-125 MPa | | **Fatigue Strength** | 75-90 MPa | | **Bend Radius (90°)** | 1-2t | --- ### **4. International Standards** | Standard Body | Designation | |---------------|-------------| | **Aluminum Association (AA)** | AA 5005-H14 | | **European Standard (EN)** | EN AW-5005-H14 | | **ISO** | AlMg1 H14 (ISO 209) | | **UNS** | A95005 | | **ASTM** | B209 | --- ### **5. Product Applications** **Architectural Applications:** - Building facades and curtain walls - Roofing and siding systems - Interior partitions - Decorative panels - Signage and architectural features **Transportation Applications:** - Vehicle interior panels - Truck and trailer bodies - Railway carriage interiors - Marine superstructures - Aircraft interior components **Electrical Applications:** - Busbars and conductors - Electrical enclosures - Switchgear components - Transformer housings - Power distribution parts **Industrial Applications:** - Machine panels and guards - Equipment housings - Workstation components - Storage systems - Display and fixture manufacturing --- ### **6. Key Characteristics & Advantages** - **Enhanced Strength**: Approximately 50% stronger than O temper condition - **Good Formability**: Suitable for most bending and forming operations - **Excellent Corrosion Resistance**: Maintains high performance in harsh environments - **Superior Flatness**: Excellent surface quality and flatness retention - **Good Anodizing Response**: Produces high-quality anodic coatings - **Improved Stiffness**: Better resistance to deformation under load - **Weldability**: Can be welded using conventional methods --- ### **7. H14 Temper Specific Features** **Mechanical Performance:** - Half-hard condition with balanced properties - Good spring characteristics - Improved fatigue resistance - Consistent mechanical properties - Better resistance to denting **Manufacturing Advantages:** - Predictable springback in forming - Good blanking and piercing quality - Suitable for hemming operations - Excellent for roll forming - Maintains shape during handling --- ### **8. Processing Guidelines** **Forming Operations:** - Minimum bend radius: 1-2 times material thickness - Suitable for moderate drawing operations - Good for press brake forming - Can be roll-formed effectively - Responds well to stamping **Joining Methods:** - TIG and MIG welding recommended - Resistance welding suitable - Adhesive bonding effective - Mechanical fastening applicable - Requires proper technique for optimal results **Finishing Operations:** - Excellent for anodizing with consistent results - Suitable for painting and powder coating - Good base for chemical conversion coatings - Can be brushed or polished - Accepts various surface treatments **Disclaimer:** The information provided is for reference purposes only. The H14 temper offers a practical balance of strength and formability for a wide range of applications. Properties may vary depending on manufacturing processes, product form, and thickness. For critical applications, consult technical data sheets from material suppliers and conduct appropriate testing. The material provides good performance characteristics while maintaining adequate workability for most fabrication processes.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1771 gallon liquid totes Special package is available on request.