3010 Aluminum alloy,Aluminum 3010 alloy,E FORU

### **Aluminum 3010 Alloy Product Introduction** **Aluminum 3010** is a medium-strength aluminum-manganese alloy specifically designed to offer an optimal balance of strength, formability, and corrosion resistance. This alloy features controlled chemical composition that ensures consistent performance across various applications, particularly in automotive, construction, and general engineering sectors. --- #### **1. Chemical Composition** | Element | Content (%) | | :--- | :--- | | **Manganese (Mn)** | 1.0 - 1.5 | | **Magnesium (Mg)** | 0.40 - 0.9 | | **Iron (Fe)** | 0.7 max | | **Silicon (Si)** | 0.40 max | | **Copper (Cu)** | 0.25 max | | **Zinc (Zn)** | 0.20 max | | **Other Elements** | each 0.05 max, total 0.15 max | | **Aluminum (Al)** | Balance | *Alloy Characteristics:* - **Manganese** provides solid solution strengthening - **Magnesium** enhances strength and corrosion resistance - **Controlled silicon** for improved formability - Optimized balance between strength and workability --- #### **2. Physical Properties** | Property | Value / Description | | :--- | :--- | | **Density** | 2.73 g/cm³ (0.098 lb/in³) | | **Melting Range** | 640 - 655 °C (1184 - 1211 °F) | | **Modulus of Elasticity** | 69 GPa (10,000 ksi) | | **Thermal Conductivity** | 145 W/m·K (100 BTU·in/hr·ft²·°F) | | **Electrical Conductivity** | 38% IACS | | **Coefficient of Thermal Expansion** | 23.6 × 10⁻⁶/°C (20-100°C) | | **Specific Heat Capacity** | 900 J/kg·K | --- #### **3. Mechanical Properties** *Typical properties for H14 temper:* - **Tensile Ultimate Strength:** 160 - 200 MPa (23 - 29 ksi) - **Tensile Yield Strength (0.2% Offset):** 130 - 170 MPa (19 - 25 ksi) - **Elongation:** 4 - 8% (in 2 inches) - **Shear Strength:** 105 MPa (15 ksi) - **Brinell Hardness:** 40 - 50 HB *Typical properties for O temper:* - **Tensile Ultimate Strength:** 115 - 155 MPa (17 - 22 ksi) - **Tensile Yield Strength:** 45 - 85 MPa (7 - 12 ksi) - **Elongation:** 18 - 24% --- #### **4. International Standards** * **European Standards (EN):** * **EN 573-3** - Chemical composition and form of products * **EN 485-2** - Mechanical properties * **ASTM:** * **ASTM B209** - Aluminum and Aluminum-Alloy Sheet and Plate * **ISO:** * **ISO 6361-2** - Wrought Aluminum and Aluminum Alloy Sheets, Strips and Plates * **National Standards:** * **GB/T 3190** (China) * **JIS H 4000** (Japan) --- #### **5. Product Applications** 3010 alloy is used in various industrial applications: * **Automotive Industry:** - Body panels and trim components - Interior structural parts - Heat shield components - Bumper reinforcements * **Building & Construction:** - Roofing and siding systems - Wall cladding panels - Architectural trim - Gutter systems * **Consumer Products:** - Appliance cabinets and panels - Furniture components - Lighting fixtures - Household utensils * **General Engineering:** - Storage cabinets - Electrical enclosures - Machinery guards - Display systems --- #### **6. Key Advantages** * **Excellent Formability:** Good for bending and forming operations * **Balanced Strength:** Adequate mechanical properties for most applications * **Superior Corrosion Resistance:** Excellent performance in various environments * **Good Weldability:** Compatible with standard welding methods * **Excellent Surface Quality:** Ideal for painting and decorative finishes * **Cost-Effective:** Economical solution for mass production * **Recyclable:** Environmentally friendly material --- #### **7. Fabrication Characteristics** * **Welding:** Good weldability using GMAW, GTAW, and resistance welding * **Forming:** Excellent for bending, roll forming, and stamping operations * **Machining:** Fair machinability with proper tool geometry * **Strain Hardening:** Good response to cold working processes * **Surface Treatment:** Excellent for painting, anodizing, and chemical conversion * **Joining:** Suitable for adhesive bonding and mechanical fastening --- #### **8. Corrosion Performance** * **Atmospheric Corrosion:** Excellent * **Marine Environment:** Good * **Stress Corrosion Cracking:** Good Resistance * **Pitting Resistance:** Good * **Industrial Atmospheres:** Good Resistance --- #### **9. Special Features** * **Optimized Chemistry** for balanced performance * **Consistent Quality** through controlled manufacturing * **Good Thermal Conductivity** for heat transfer applications * **Excellent Surface Finish** for aesthetic applications * **Non-Toxic** for food contact applications --- #### **10. Quality Assurance** * Strict chemical composition control * Consistent mechanical properties * Comprehensive quality testing * Good dimensional stability * Full traceability and certification **Conclusion** Aluminum 3010 alloy offers a well-balanced combination of mechanical properties, fabrication characteristics, and corrosion resistance, making it a versatile choice for various industrial applications. Its optimized chemical composition ensures reliable performance in automotive, construction, and consumer product applications where consistent quality and good formability are essential. The alloy provides adequate strength for most structural applications while maintaining excellent workability and surface quality for finishing operations. 3010 alloy represents a cost-effective solution for manufacturers seeking a reliable aluminum material that delivers consistent performance across multiple production processes and end-use applications.

Packing of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 1680 gallon liquid totes Special package is available on request.